1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

HyperCon [Help] RPi 2 isnt communicating with LEDs

Discussion in 'Software Support' started by AceSG, 17 February 2017.

  1. AceSG

    AceSG New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi2, RPi3
    Hello, My RPi 2 isnt communicating with LEDs, As in if I send a command from HyperCon to change colors they dont, same if I use putty... Theres also "phantom power" thats powering everything when the main plug is disconnected. The only thing thats connected is the HDMI ports... (Can they transfer power?)

    Here is a parts list, If this helps.
    HKBAYI 5M 16.4F 5V WS2801 addressable RGB LED
    Generic USB 2.0 Easycap Dc60 Tv Dvd Vhs Video Adapter
    SOWTECH ST-HDSP0001 1X2 HDMI Splitter
    Daisen tech HDMI to AV Converter 1080p HDMI to RCA CVBS AV Composite Adapter
    Mokungit 1pc 5V 8A Plastic LED Power Supply

    Hyperion Config
    Code:
    {
        // DEVICE CONFIGURATION
        "device" :
        {
            "name"       : "MyHyperionConfig",
            "type"       : "ws2801",
            "output"     : "/dev/spidev0.0",
            "rate"     : 1000000,
            "colorOrder" : "rgb"
        },
    
        // COLOR CALIBRATION CONFIG
        "color" :
        {
            "channelAdjustment" :
            [
                {
                    "id"   : "default",
                    "leds" : "*",
                    "pureRed" :
                    {
                        "redChannel"        : 255,
                        "greenChannel"        : 0,
                        "blueChannel"        : 0
                    },
                    "pureGreen" :
                    {
                        "redChannel"        : 0,
                        "greenChannel"        : 255,
                        "blueChannel"        : 0
                    },
                    "pureBlue" :
                    {
                        "redChannel"        : 0,
                        "greenChannel"        : 0,
                        "blueChannel"        : 255
                    }
                }
            ],
            "temperature" :
            [
                {
                    "id"   : "default",
                    "leds" : "*",
                    "correctionValues" :
                    {
                        "red"     : 255,
                        "green"    : 255,
                        "blue"     : 255
                    }
                }
            ],
            "transform" :
            [
                {
                    "id"   : "default",
                    "leds" : "*",
                    "hsl" :
                    {
                        "saturationGain"    : 1.0000,
                        "luminanceGain"        : 0.7500,
                        "luminanceMinimum"        : 0.0000
                    },
                    "red" :
                    {
                        "threshold"     : 0.0000,
                        "gamma"         : 2.5000
                    },
                    "green" :
                    {
                        "threshold"     : 0.0000,
                        "gamma"         : 2.5000
                    },
                    "blue" :
                    {
                        "threshold"     : 0.0000,
                        "gamma"         : 2.5000
                    }
                }
            ],
        // SMOOTHING CONFIG
            "smoothing" :
            {
                "type"            : "linear",
                "time_ms"         : 200,
                "updateFrequency" : 30.0000,
                "updateDelay"     : 0
            }
        },
    
        // NO V4L2 GRABBER CONFIG
        // FRAME GRABBER CONFIG
        "framegrabber" :
        {
            "width" : 64,
            "height" : 64,
            "frequency_Hz" : 10.0,
            "priority" : 890
        },
    
        // BLACKBORDER CONFIG
        "blackborderdetector" :
        {
            "enable" : true,
            "threshold" : 0.0,
            "unknownFrameCnt" : 600,
            "borderFrameCnt" : 50,
            "maxInconsistentCnt" : 10,
            "blurRemoveCnt" : 1,
            "mode" : "default"
        },
    
        // BOOTEFFECT CONFIG
        "bootsequence" :
        {
            "color" : [0,0,0],
            "effect" : "Rainbow swirl fast",
            "duration_ms" : 3000,
            "priority" : 700
        },
    
        // JSON SERVER CONFIG
        "jsonServer" :
        {
            "port" : 19444
        },
    
        // PROTO SERVER CONFIG
        "protoServer" :
        {
            "port" : 19445
        },
    
        // EFFECT PATH
        "effects" :
        {
            "paths" :
            [
                "/storage/hyperion/effects",
                "/usr/share/hyperion/effects"
            ]
        },
    
        // NO KODI CHECK CONFIG
        // NO BOBLIGHT SERVER CONFIG
        // NO JSON/PROTO FORWARD CONFIG
    
        // LED CONFIGURATION
        "leds" :
        [
            {
                "index" : 0,
                "hscan" : { "minimum" : 0.0625, "maximum" : 0.1250 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 1,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0625 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 2,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.8571, "maximum" : 1.0000 }
            },
            {
                "index" : 3,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.7143, "maximum" : 0.8571 }
            },
            {
                "index" : 4,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.5714, "maximum" : 0.7143 }
            },
            {
                "index" : 5,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.4286, "maximum" : 0.5714 }
            },
            {
                "index" : 6,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.2857, "maximum" : 0.4286 }
            },
            {
                "index" : 7,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.1429, "maximum" : 0.2857 }
            },
            {
                "index" : 8,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.1429 }
            },
            {
                "index" : 9,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0625 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 10,
                "hscan" : { "minimum" : 0.0625, "maximum" : 0.1250 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 11,
                "hscan" : { "minimum" : 0.1250, "maximum" : 0.1875 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 12,
                "hscan" : { "minimum" : 0.1875, "maximum" : 0.2500 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 13,
                "hscan" : { "minimum" : 0.2500, "maximum" : 0.3125 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 14,
                "hscan" : { "minimum" : 0.3125, "maximum" : 0.3750 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 15,
                "hscan" : { "minimum" : 0.3750, "maximum" : 0.4375 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 16,
                "hscan" : { "minimum" : 0.4375, "maximum" : 0.5000 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 17,
                "hscan" : { "minimum" : 0.5000, "maximum" : 0.5625 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 18,
                "hscan" : { "minimum" : 0.5625, "maximum" : 0.6250 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 19,
                "hscan" : { "minimum" : 0.6250, "maximum" : 0.6875 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 20,
                "hscan" : { "minimum" : 0.6875, "maximum" : 0.7500 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 21,
                "hscan" : { "minimum" : 0.7500, "maximum" : 0.8125 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 22,
                "hscan" : { "minimum" : 0.8125, "maximum" : 0.8750 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 23,
                "hscan" : { "minimum" : 0.8750, "maximum" : 0.9375 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 24,
                "hscan" : { "minimum" : 0.9375, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 25,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.1429 }
            },
            {
                "index" : 26,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.1429, "maximum" : 0.2857 }
            },
            {
                "index" : 27,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.2857, "maximum" : 0.4286 }
            },
            {
                "index" : 28,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.4286, "maximum" : 0.5714 }
            },
            {
                "index" : 29,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.5714, "maximum" : 0.7143 }
            },
            {
                "index" : 30,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.7143, "maximum" : 0.8571 }
            },
            {
                "index" : 31,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.8571, "maximum" : 1.0000 }
            },
            {
                "index" : 32,
                "hscan" : { "minimum" : 0.9375, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 33,
                "hscan" : { "minimum" : 0.8750, "maximum" : 0.9375 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 34,
                "hscan" : { "minimum" : 0.8125, "maximum" : 0.8750 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 35,
                "hscan" : { "minimum" : 0.7500, "maximum" : 0.8125 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 36,
                "hscan" : { "minimum" : 0.6875, "maximum" : 0.7500 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 37,
                "hscan" : { "minimum" : 0.6250, "maximum" : 0.6875 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 38,
                "hscan" : { "minimum" : 0.5625, "maximum" : 0.6250 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 39,
                "hscan" : { "minimum" : 0.5000, "maximum" : 0.5625 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 40,
                "hscan" : { "minimum" : 0.4375, "maximum" : 0.5000 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 41,
                "hscan" : { "minimum" : 0.3750, "maximum" : 0.4375 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 42,
                "hscan" : { "minimum" : 0.3125, "maximum" : 0.3750 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 43,
                "hscan" : { "minimum" : 0.2500, "maximum" : 0.3125 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 44,
                "hscan" : { "minimum" : 0.1875, "maximum" : 0.2500 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 45,
                "hscan" : { "minimum" : 0.1250, "maximum" : 0.1875 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            }
        ],
    
        "endOfJson" : "endOfJson"
    }
    


    HyperCon settings
    Code:
    #Pesistent settings file for HyperCon
    #Thu Feb 16 18:17:18 HST 2017
    ColorConfig.mTransforms[0].mBlueChannelRedSpinner=0
    ColorConfig.mTransforms[0].mRedChannelRedSpinner=255
    ColorConfig.mSmoothingUpdateFrequency_Hz=30.0
    MiscConfig.mScreensaverOn=true
    Grabberv4l2Config.mMode=TwoD
    MiscConfig.mFrameGrabberWidth=64
    SshAndColorPickerConfig.FileName=hyperion.config.json
    MiscConfig.mFrameGrabberInterval_ms=100
    SshAndColorPickerConfig.srcPath=
    MiscConfig.mEffectColorBspinner=0
    MiscConfig.mPictureOn=true
    SshAndColorPickerConfig.sshCommands[0].command=sudo service hyperion start
    MiscConfig.mEffectDurationspinner=3000
    ImageProcessConfig.mVerticalDepth=0.05
    SshAndColorPickerConfig.sshCommands[2].command=sudo service hyperion restart
    Grabberv4l2Config.mPriority=900
    MiscConfig.mEffectPriorityspinner=700
    ColorConfig.mTransforms[0].mRedThreshold=0.0
    ColorConfig.mUpdateDelay=0
    Grabberv4l2Config.mCropRight=0
    MiscConfig.mXbmcAddress=127.0.0.1
    ColorConfig.mTransforms[0].mluminanceMinimumSpinner=0.0
    Grabberv4l2Config.mDevice=/dev/video0
    DeviceConfig.mColorByteOrder=RGB
    ColorConfig.mTransforms[0].mBlueThreshold=0.0
    DeviceConfig.mDeviceProperties={output\=/dev/spidev0.0, rate\=250}
    LedFrameConstruction.bottomleftCorner=false
    LedFrameConstruction.rightLedCnt=12
    MiscConfig.mAudioOn=true
    ColorConfig.mSmoothingType=linear
    Grabberv4l2Config.mGrabberv4l2Enabled=true
    MiscConfig.mEffectsetCombo=rainbowswirlfast
    SshAndColorPickerConfig.colorPickerShowColorWheel=true
    MiscConfig.mFrameGrabberHeight=64
    LedFrameConstruction.firstLedOffset=-35
    ColorConfig.mTransforms[0].mGreenChannelGreenSpinner=255
    Grabberv4l2Config.mCropLeft=0
    ImageProcessConfig.mOverlapFraction=0.0
    MiscConfig.mXbmcTcpPort=9090
    ColorConfig.mTransforms[0].mRedTemperature=255
    ColorConfig.mTransforms[0].mBlueTemperature=255
    ColorConfig.mSmoothingEnabled=true
    Grabberv4l2Config.mCropBottom=0
    ColorConfig.mTransforms[0].mBlueChannelBlueSpinner=255
    SshAndColorPickerConfig.password=raspberry
    MiscConfig.mBlackBorderuFrameCnt=600
    LedFrameConstruction.clockwiseDirection=false
    MiscConfig.mProtoPort=19445
    MiscConfig.mEffectColorGspinner=0
    ColorConfig.mTransforms[0].mHSLSaturationGainAdjustSpinner=1.0
    ColorConfig.mTransforms[0].mDummy1Label=255
    MiscConfig.mBlackBorderThreshold=0.01
    ColorConfig.mTransforms[0].mGreenChannelBlueSpinner=0
    ColorConfig.mTransforms[0].mGreenTemperature=255
    Grabberv4l2Config.mWidth=0
    MiscConfig.mVideoOn=true
    LedFrameConstruction.bottomrightCorner=false
    Grabberv4l2Config.mStandard=PAL
    HyperConConfig.loadDefaultEffect=true
    MiscConfig.mBlackBorderbFrameCnt=50
    ImageProcessConfig.mHorizontalGap=0.0
    MiscConfig.mforwardEnabled=false
    LedFrameConstruction.bottomLedCnt=23
    SshAndColorPickerConfig.ipAdress=192.168.0.3
    ColorConfig.mTransforms[0].mGreenChannelRedSpinner=0
    MiscConfig.mBlackBorderbRemoveCnt=1
    Grabberv4l2Config.mBlueSignalThreshold=0.0
    SshAndColorPickerConfig.username=pi
    MiscConfig.mEffectColorRspinner=0
    Grabberv4l2Config.mFrameDecimation=2
    ColorConfig.mTransforms[0].mDummy2Label=255
    ColorConfig.mTransforms[0].mRedChannelGreenSpinner=0
    ColorConfig.mTransforms[0].mLedIndexString=*
    ColorConfig.mTransforms[0].mRedGamma=2.5
    LedFrameConstruction.leftLedCnt=12
    SshAndColorPickerConfig.sshCommands[1].command=sudo service hyperion stop
    Grabberv4l2Config.mInput=0
    LedFrameConstruction.topLedCnt=23
    DeviceConfig.mType=ws2801
    MiscConfig.mBlackBordermInconsistentCnt=10
    ColorConfig.mTransforms[0].mBlueChannelGreenSpinner=0
    Grabberv4l2Config.mHeight=0
    MiscConfig.m3DCheckingEnabled=true
    SshAndColorPickerConfig.port=22
    LedFrameConstruction.toprightCorner=false
    ColorConfig.mTransforms[0].mId=default
    ColorConfig.mTransforms[0].mRedChannelBlueSpinner=0
    Grabberv4l2Config.mGreenSignalThreshold=0.0
    Grabberv4l2Config.mSizeDecimation=8
    MiscConfig.mBoblightPort=19333
    ColorConfig.mTransforms[0].mHSLLuminanceGainAdjustSpinner=0.75
    SshAndColorPickerConfig.selectedSystemType=allsystems
    ColorConfig.mTransforms[0].mDummy3Label=255
    ColorConfig.mSmoothingTime_ms=200
    MiscConfig.mProtofield="127.0.0.1\:19447"
    SshAndColorPickerConfig.sshCommands[3].command=sudo killall hyperionv4l2
    ColorConfig.mTransforms[0].mBlueGamma=2.5
    LedFrameConstruction.topleftCorner=false
    MiscConfig.mBlackBorderEnabled=true
    LedFrameConstruction.bottomGapCnt=0
    MiscConfig.mJsonPort=19444
    ImageProcessConfig.mHorizontalDepth=0.08
    MiscConfig.mPauseOn=false
    MiscConfig.mJsonfield="127.0.0.1\:19446"
    MiscConfig.mBoblightPriority=900
    DeviceConfig.mNameField=MyHyperionConfig
    MiscConfig.mBootEffectEnabled=true
    Grabberv4l2Config.mRedSignalThreshold=0.0
    ImageProcessConfig.mVerticalGap=0.0
    MiscConfig.mPathGENN=/usr/share/hyperion/effects
    MiscConfig.mXbmcCheckerEnabled=false
    MiscConfig.mFrameGrabberEnabled=false
    SshAndColorPickerConfig.colorPickerInExpertmode=false
    Grabberv4l2Config.mCropTop=0
    MiscConfig.mBoblightInterfaceEnabled=false
    MiscConfig.mFrameGrabberPriority=890
    ColorConfig.mTransforms[0].mGreenThreshold=0.0
    MiscConfig.mBlackbordermCombo=defaultt
    ColorConfig.mTransforms[0].mGreenGamma=2.5
    MiscConfig.mMenuOn=false
    MiscConfig.mPathOE=/storage/hyperion/effects

    Thank you.

    Mod - Sorry, if this was posted in the wrong place, please move it if it is.
     
  2. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,296
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    you have no v4l2-part in your config -> no usb grabbed picture can be used from hyperion

    // NO V4L2 GRABBER CONFIG

    did you connect the rpi and the leds with one ground connection?
     
  3. AceSG

    AceSG New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi2, RPi3

    you have no v4l2-part in your config - What do you mean by that?? I do know when I try to do a screen cap, it comes in as all black. But theres something on the screen.

    Yes I did use only one ground connection, That splits off, one going to the power, and one going to the rpi, and one back to the led.
     
  4. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,296
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    // NO V4L2 GRABBER CONFIG
    means, that you dont use your usb-video grabber, cause it isnt enabled in the config
     
  5. AceSG

    AceSG New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi2, RPi3
    Now its doing this... inside the logs. Is it something to do with my grabber?


    Code:
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 systemd[1]: Started Hyperion Systemd service.
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: Hyperion Ambilight Deamon (749)
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: Version   : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: Build Time: Jul 25 2016 06:54:40
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: HYPERION INFO: ColorTransform 'default' => [0; 69]
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: HYPERION INFO: ColorCorrection 'default' => [0; 69]
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: HYPERION INFO: ColorAdjustment 'default' => [0; 69]
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: LEDDEVICE INFO: configuration:
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: {
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: "colorOrder" : "rgb",
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: "name" : "MyHyperionConfig",
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: "output" : "/dev/spidev0.0",
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: "rate" : 1000000,
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: "type" : "ws2801"
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: }
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: INFO: Creating linear smoothing
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=200;updateDelay=0
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: INFO: Hyperion started and initialised
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: BLACKBORDER INFO: mode:default
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: started
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: INFO: Json server created and started on port 19444
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: INFO: Proto server created and started on port 19445
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 systemd[1]: hyperion.service: main process exited, code=killed, status=6/ABRT
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 systemd[1]: Unit hyperion.service entered failed state.
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 systemd[1]: hyperion.service holdoff time over, scheduling restart.
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 systemd[1]: Stopping Hyperion Systemd service...
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 systemd[1]: Starting Hyperion Systemd service...
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 systemd[1]: hyperion.service start request repeated too quickly, refusing to start.
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 systemd[1]: Failed to start Hyperion Systemd service.
    ssh in:     Feb 22 00:48:03 AmbientLightRPi2 systemd[1]: Unit hyperion.service entered failed state.
    
     
  6. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,296
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    looks so yes...
    ssh in: Feb 22 00:48:03 AmbientLightRPi2 hyperiond[749]: what(): VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device

    did you read the wiki or tutorials? do you use a usbtv007/fushicai usb grabber?
    with "lsusb" in ssh you can see which one you have
     
  7. AceSG

    AceSG New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi2, RPi3
    Code:
    Bus 001 Device 004: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
    Bus 001 Device 005: ID 534d:0021
    Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
    Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    
    I was told it worked... when I bough it.
     
  8. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,296
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
  9. AceSG

    AceSG New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi2, RPi3
    ok, but still why is the LEDs not responding to any of the commands??
     
  10. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,296
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    do you have a new log?
     
  11. AceSG

    AceSG New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi2, RPi3
    Code:
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 systemd[1]: Starting Hyperion Systemd service...
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 systemd[1]: Started Hyperion Systemd service.
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: Hyperion Ambilight Deamon (746)
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: Version   : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: Build Time: Jul 25 2016 06:54:40
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: HYPERION INFO: ColorTransform 'default' => [0; 69]
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: HYPERION INFO: ColorCorrection 'default' => [0; 69]
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: HYPERION INFO: ColorAdjustment 'default' => [0; 69]
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: LEDDEVICE INFO: configuration:
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: {
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: "colorOrder" : "rgb",
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: "name" : "MyHyperionConfig",
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: "output" : "/dev/spidev0.0",
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: "rate" : 1000000,
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: "type" : "ws2801"
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: }
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: INFO: Creating linear smoothing
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=200;updateDelay=0
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: INFO: Hyperion started and initialised
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: BLACKBORDER INFO: mode:default
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: started
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: INFO: Json server created and started on port 19444
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: INFO: Proto server created and started on port 19445
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 hyperiond[746]: what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 systemd[1]: hyperion.service: main process exited, code=killed, status=6/ABRT
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 systemd[1]: Unit hyperion.service entered failed state.
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 systemd[1]: hyperion.service holdoff time over, scheduling restart.
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 systemd[1]: Stopping Hyperion Systemd service...
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 systemd[1]: Starting Hyperion Systemd service...
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 systemd[1]: hyperion.service start request repeated too quickly, refusing to start.
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 systemd[1]: Failed to start Hyperion Systemd service.
    ssh in:     Feb 22 11:17:10 AmbientLightRPi2 systemd[1]: Unit hyperion.service entered failed state.
    ssh out:     hyperion-remote  -c ff5666
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
    ssh in:         build time: Jul 25 2016 06:54:18
    ssh out:     Unable to connect to host
    ssh out:     hyperion-remote  -c ff5666
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
    ssh in:         build time: Jul 25 2016 06:54:18
    ssh out:     Unable to connect to host
    ssh out:     sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
    ssh out:     hyperion-remote --clearall
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
    ssh in:         build time: Jul 25 2016 06:54:18
    ssh out:     Unable to connect to host
    
     
  12. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,296
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    ssh in: Feb 22 11:17:10 AmbientLightRPi2 systemd[1]: Unit hyperion.service entered failed state.

    if hyperiond doesnt run, then you cant run any other command....

    just remove the v4l2 grabber part for now, then you can start hyperion and send commands to it
     
  13. AceSG

    AceSG New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi2, RPi3
    Same... The colors wont change when I send commands to change it...
    Code:
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 systemd[1]: Starting Hyperion Systemd service...
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 systemd[1]: Started Hyperion Systemd service.
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: Hyperion Ambilight Deamon (2342)
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: Version   : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: Build Time: Jul 25 2016 06:54:40
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: HYPERION INFO: ColorTransform 'default' => [0; 69]
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: HYPERION INFO: ColorCorrection 'default' => [0; 69]
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: HYPERION INFO: ColorAdjustment 'default' => [0; 69]
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: LEDDEVICE INFO: configuration:
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: {
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: "colorOrder" : "rgb",
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: "name" : "MyHyperionConfig",
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: "output" : "/dev/spidev0.0",
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: "rate" : 1000000,
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: "type" : "ws2801"
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: }
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: INFO: Creating linear smoothing
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=200;updateDelay=0
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: INFO: Hyperion started and initialised
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: BLACKBORDER INFO: mode:default
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: started
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: INFO: Json server created and started on port 19444
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: INFO: Proto server created and started on port 19445
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2342]: what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 systemd[1]: hyperion.service: main process exited, code=killed, status=6/ABRT
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 systemd[1]: Unit hyperion.service entered failed state.
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 systemd[1]: hyperion.service holdoff time over, scheduling restart.
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 systemd[1]: Stopping Hyperion Systemd service...
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 systemd[1]: Starting Hyperion Systemd service...
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 systemd[1]: Started Hyperion Systemd service.
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: Hyperion Ambilight Deamon (2353)
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: Version   : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: Build Time: Jul 25 2016 06:54:40
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: HYPERION INFO: ColorTransform 'default' => [0; 69]
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: HYPERION INFO: ColorCorrection 'default' => [0; 69]
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: HYPERION INFO: ColorAdjustment 'default' => [0; 69]
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: LEDDEVICE INFO: configuration:
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: {
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: "colorOrder" : "rgb",
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: "name" : "MyHyperionConfig",
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: "output" : "/dev/spidev0.0",
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: "rate" : 1000000,
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: "type" : "ws2801"
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: }
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: INFO: Creating linear smoothing
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=200;updateDelay=0
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: INFO: Hyperion started and initialised
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: BLACKBORDER INFO: mode:default
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: started
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: INFO: Json server created and started on port 19444
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: INFO: Proto server created and started on port 19445
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 hyperiond[2353]: what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 systemd[1]: hyperion.service: main process exited, code=killed, status=6/ABRT
    ssh in:     Feb 23 02:27:21 AmbientLightRPi2 systemd[1]: Unit hyperion.service entered failed state.
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 systemd[1]: hyperion.service holdoff time over, scheduling restart.
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 systemd[1]: Stopping Hyperion Systemd service...
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 systemd[1]: Starting Hyperion Systemd service...
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 systemd[1]: Started Hyperion Systemd service.
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: Hyperion Ambilight Deamon (2356)
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: Version   : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: Build Time: Jul 25 2016 06:54:40
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: HYPERION INFO: ColorTransform 'default' => [0; 69]
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: HYPERION INFO: ColorCorrection 'default' => [0; 69]
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: HYPERION INFO: ColorAdjustment 'default' => [0; 69]
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: LEDDEVICE INFO: configuration:
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: {
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: "colorOrder" : "rgb",
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: "name" : "MyHyperionConfig",
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: "output" : "/dev/spidev0.0",
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: "rate" : 1000000,
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: "type" : "ws2801"
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: }
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: INFO: Creating linear smoothing
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=200;updateDelay=0
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: INFO: Hyperion started and initialised
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: BLACKBORDER INFO: mode:default
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: started
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: INFO: Json server created and started on port 19444
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: INFO: Proto server created and started on port 19445
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2356]: what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 systemd[1]: hyperion.service: main process exited, code=killed, status=6/ABRT
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 systemd[1]: Unit hyperion.service entered failed state.
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 systemd[1]: hyperion.service holdoff time over, scheduling restart.
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 systemd[1]: Stopping Hyperion Systemd service...
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 systemd[1]: Starting Hyperion Systemd service...
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 systemd[1]: Started Hyperion Systemd service.
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: Hyperion Ambilight Deamon (2360)
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: Version   : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: Build Time: Jul 25 2016 06:54:40
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: HYPERION INFO: ColorTransform 'default' => [0; 69]
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: HYPERION INFO: ColorCorrection 'default' => [0; 69]
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: HYPERION INFO: ColorAdjustment 'default' => [0; 69]
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: LEDDEVICE INFO: configuration:
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: {
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: "colorOrder" : "rgb",
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: "name" : "MyHyperionConfig",
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: "output" : "/dev/spidev0.0",
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: "rate" : 1000000,
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: "type" : "ws2801"
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: }
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: INFO: Creating linear smoothing
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=200;updateDelay=0
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: INFO: Hyperion started and initialised
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: BLACKBORDER INFO: mode:default
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: started
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: INFO: Json server created and started on port 19444
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 systemd[1]: hyperion.service: main process exited, code=killed, status=6/ABRT
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 systemd[1]: Unit hyperion.service entered failed state.
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: INFO: Proto server created and started on port 19445
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Feb 23 02:27:22 AmbientLightRPi2 hyperiond[2360]: what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 systemd[1]: hyperion.service holdoff time over, scheduling restart.
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 systemd[1]: Stopping Hyperion Systemd service...
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 systemd[1]: Starting Hyperion Systemd service...
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 systemd[1]: Started Hyperion Systemd service.
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: Hyperion Ambilight Deamon (2363)
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: Version   : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: Build Time: Jul 25 2016 06:54:40
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: HYPERION INFO: ColorTransform 'default' => [0; 69]
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: HYPERION INFO: ColorCorrection 'default' => [0; 69]
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: HYPERION INFO: ColorAdjustment 'default' => [0; 69]
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: LEDDEVICE INFO: configuration:
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: {
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: "colorOrder" : "rgb",
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: "name" : "MyHyperionConfig",
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: "output" : "/dev/spidev0.0",
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: "rate" : 1000000,
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: "type" : "ws2801"
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: }
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: INFO: Creating linear smoothing
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=200;updateDelay=0
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: INFO: Hyperion started and initialised
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: BLACKBORDER INFO: mode:default
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: started
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: INFO: Json server created and started on port 19444
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 systemd[1]: hyperion.service: main process exited, code=killed, status=6/ABRT
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 systemd[1]: Unit hyperion.service entered failed state.
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: INFO: Proto server created and started on port 19445
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 hyperiond[2363]: what():  VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 systemd[1]: hyperion.service holdoff time over, scheduling restart.
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 systemd[1]: Stopping Hyperion Systemd service...
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 systemd[1]: Starting Hyperion Systemd service...
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 systemd[1]: hyperion.service start request repeated too quickly, refusing to start.
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 systemd[1]: Failed to start Hyperion Systemd service.
    ssh in:     Feb 23 02:27:23 AmbientLightRPi2 systemd[1]: Unit hyperion.service entered failed state.
    ssh in:     Feb 23 02:44:36 AmbientLightRPi2 systemd[1]: Starting Hyperion Systemd service...
    ssh in:     Feb 23 02:44:36 AmbientLightRPi2 systemd[1]: Started Hyperion Systemd service.
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: Hyperion Ambilight Deamon (2530)
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: Version   : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: Build Time: Jul 25 2016 06:54:40
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: HYPERION INFO: ColorTransform 'default' => [0; 69]
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: HYPERION INFO: ColorCorrection 'default' => [0; 69]
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: HYPERION INFO: ColorAdjustment 'default' => [0; 69]
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: LEDDEVICE INFO: configuration:
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: {
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: "colorOrder" : "rgb",
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: "name" : "MyHyperionConfig",
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: "output" : "/dev/spidev0.0",
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: "rate" : 1000000,
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: "type" : "ws2801"
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: }
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: INFO: Creating linear smoothing
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=200;updateDelay=0
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: INFO: Hyperion started and initialised
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: BLACKBORDER INFO: mode:default
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: started
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: INFO: Json server created and started on port 19444
    ssh in:     Feb 23 02:44:37 AmbientLightRPi2 hyperiond[2530]: INFO: Proto server created and started on port 19445
    ssh in:     Feb 23 02:44:40 AmbientLightRPi2 hyperiond[2530]: EFFECTENGINE INFO: effect finished
    ssh in:     Feb 23 02:44:55 AmbientLightRPi2 hyperiond[2530]: JSONSERVER INFO: New connection
    ssh in:     Feb 23 02:44:55 AmbientLightRPi2 hyperiond[2530]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Feb 23 02:44:55 AmbientLightRPi2 hyperiond[2530]: BLACKBORDER INFO: mode:default
    ssh in:     Feb 23 02:44:55 AmbientLightRPi2 hyperiond[2530]: JSONSERVER INFO: Connection closed
    ssh in:     Feb 23 02:45:32 AmbientLightRPi2 systemd[1]: Stopping Hyperion Systemd service...
    ssh in:     Feb 23 02:45:32 AmbientLightRPi2 hyperiond[2530]: INFO: Application closed with code 0
    ssh in:     Feb 23 02:45:32 AmbientLightRPi2 hyperiond[2530]: EFFECTENGINE INFO: Cleaning up Python interpreter
    ssh in:     Feb 23 02:45:32 AmbientLightRPi2 systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Feb 23 02:45:41 AmbientLightRPi2 systemd[1]: Starting Hyperion Systemd service...
    ssh in:     Feb 23 02:45:41 AmbientLightRPi2 systemd[1]: Started Hyperion Systemd service.
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: Hyperion Ambilight Deamon (2570)
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: Version   : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: Build Time: Jul 25 2016 06:54:40
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: HYPERION INFO: ColorTransform 'default' => [0; 69]
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: HYPERION INFO: ColorCorrection 'default' => [0; 69]
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: HYPERION INFO: ColorAdjustment 'default' => [0; 69]
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: LEDDEVICE INFO: configuration:
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: {
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: "colorOrder" : "rgb",
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: "name" : "MyHyperionConfig",
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: "output" : "/dev/spidev0.0",
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: "rate" : 1000000,
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: "type" : "ws2801"
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: }
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: INFO: Creating linear smoothing
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=200;updateDelay=0
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: INFO: Hyperion started and initialised
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: BLACKBORDER INFO: mode:default
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: started
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: INFO: Json server created and started on port 19444
    ssh in:     Feb 23 02:45:42 AmbientLightRPi2 hyperiond[2570]: INFO: Proto server created and started on port 19445
    ssh in:     Feb 23 02:45:45 AmbientLightRPi2 hyperiond[2570]: EFFECTENGINE INFO: effect finished
    ssh in:     Feb 23 02:46:49 AmbientLightRPi2 hyperiond[2570]: JSONSERVER INFO: New connection
    ssh in:     Feb 23 02:46:49 AmbientLightRPi2 hyperiond[2570]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Feb 23 02:46:49 AmbientLightRPi2 hyperiond[2570]: BLACKBORDER INFO: mode:default
    ssh in:     Feb 23 02:46:49 AmbientLightRPi2 hyperiond[2570]: JSONSERVER INFO: Connection closed
    ssh in:     Feb 23 02:49:13 AmbientLightRPi2 systemd[1]: Stopping Hyperion Systemd service...
    ssh in:     Feb 23 02:49:13 AmbientLightRPi2 hyperiond[2570]: INFO: Application closed with code 0
    ssh in:     Feb 23 02:49:13 AmbientLightRPi2 hyperiond[2570]: EFFECTENGINE INFO: Cleaning up Python interpreter
    ssh in:     Feb 23 02:49:13 AmbientLightRPi2 systemd[1]: Stopped Hyperion Systemd service.
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 systemd[1]: Starting Hyperion Systemd service...
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 systemd[1]: Started Hyperion Systemd service.
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: Hyperion Ambilight Deamon (2651)
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: Version   : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: Build Time: Jul 25 2016 06:54:40
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: HYPERION INFO: ColorTransform 'default' => [0; 69]
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: HYPERION INFO: ColorCorrection 'default' => [0; 69]
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: HYPERION INFO: ColorAdjustment 'default' => [0; 69]
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: LEDDEVICE INFO: configuration:
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: {
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: "colorOrder" : "rgb",
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: "name" : "MyHyperionConfig",
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: "output" : "/dev/spidev0.0",
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: "rate" : 1000000,
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: "type" : "ws2801"
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: }
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: INFO: Creating linear smoothing
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=200;updateDelay=0
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: INFO: Hyperion started and initialised
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: BLACKBORDER INFO: threshold set to 0.01 (3)
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: BLACKBORDER INFO: mode:default
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: started
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: INFO: Json server created and started on port 19444
    ssh in:     Feb 23 02:49:58 AmbientLightRPi2 hyperiond[2651]: INFO: Proto server created and started on port 19445
    ssh in:     Feb 23 02:50:01 AmbientLightRPi2 hyperiond[2651]: EFFECTENGINE INFO: effect finished
    ssh out:     hyperion-remote  -c ff0054
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
    ssh in:         build time: Jul 25 2016 06:54:18
    ssh in:     Connected to localhost:19444
    ssh in:     Set color to 255 0 84
    
     
  14. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,296
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    do you have time for a quick teamviewer session?
     
  15. AceSG

    AceSG New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi2, RPi3
    opps yes. do you have skype?
     
  16. AceSG

    AceSG New Member

    Messages:
    10
    Hardware:
    RPi1/Zero, RPi2, RPi3
    bump -due to DB offline-
     
  17. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,296
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    sorry no skype, send me a pm