1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SOLVED hyperion can't start with internal grabber and ws2812b

Discussion in 'Software Support' started by cheshic, 10 March 2019.

  1. cheshic

    cheshic New Member

    Messages:
    2
    Hardware:
    RPi3
    Hello to all!

    Rpi3B+
    OSMC
    wb2812b 142 led

    I am using ws2812b LEDs driving through Rpi3 pwm gpio18. The scheme is assembled correctly, because I can light the LEDs using the NeoPixel python example.

    I want to use hyperion with the internal frame grabber, only with OSMC, but it does not start with my hyperion.config.json, writes an error: hyperion.service: Failed with result 'signal'.
    config
    log

    Thank you, if you tell me what I'm doing wrong.
    P.S. sorry for my English
     
  2. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,259
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    try it without the kodi part
    // KODI CHECK CONFIG
    "xbmcVideoChecker" :
    {
    "xbmcAddress" : "192.168.1.42",
    "xbmcTcpPort" : 9090,
    "grabVideo" : true,
    "grabPictures" : true,
    "grabAudio" : true,
    "grabMenu" : false,
    "grabPause" : true,
    "grabScreensaver" : true,
    "enable3DDetection" : true
    },
    or with localhost ip : 127.0.0.1
     
  3. cheshic

    cheshic New Member

    Messages:
    2
    Hardware:
    RPi3
    Thanks for answer. I try this and many others methods, but everything did not work. I assemble a working scheme with arduino.