1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Multi-HDMI Devices Setup | 4k 65 inch TV using Hyperion

Discussion in 'Hyperion Setup Showcase' started by mpochert, 29 May 2019.

  1. mpochert

    mpochert New Member

    Messages:
    1
    Hardware:
    RPi2
    Hi,
    I finally finished my setup for my living room.

    I use about 4.5m WS2801 Leds to completely circle my 65 inch TV. Altogether I use 144 Leds.
    A Raspberry Pie powered with OSMC is used as a controller. The software for this is of course Hyperion.

    As power supply I currently use a self-constructed computer power supply, which gives me a constant 5v with enough amps. During the color calibration I only had to adjust the green. Otherwise they fit quite well.

    How are the devices connected to each other?
    I use my sound receiver from Denon as my distributor. All my different HDMI devices go into the receiver. From there an HDMI cable goes into the 4k 60hz splitter. One output goes into the TV, the other into the HDMI to Av COnverter and then into the Grabber.
    So I can switch pleasantly between sources without any problems and enjoy the Ambilight.

    Components used:
    Leds: https://de.aliexpress.com/item/1m-5...265.html?spm=a2g0s.9042311.0.0.14674c4dD44fCf
    Grabber: https://www.aliexpress.com/snapshot...orderId=100165516130848&productId=32816305573
    Switch: https://www.amazon.de/gp/product/B07JB6Y997/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
    Converter: https://www.amazon.de/gp/product/B01N5KNFD1/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1

    Here are some demonstration videos and pictures:

    [​IMG]
    upload_2019-5-29_0-55-12.png


    Regards
    Marcel