1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RPi + OpenELEC No connectivity RPi3 <> Uno [WS2812b]

Discussion in 'Software Support' started by DanDeVries, 13 November 2017.

  1. DanDeVries

    DanDeVries New Member

    Messages:
    8
    Hardware:
    RPi3, +Arduino
    Hello,

    I had a working setup with RPi3 directly to my WS2801 LEDstrip, but wanted to upgrade to WS2812b for increased leds/m. For this, additional hardware (Arduino Uno) is required, however this new setup is currently not working for me.

    Additional information/have tried so far:
    • Used this YouTube guide by 'The Mad Scientist' as base:
    • Using (original) Arduino Uno
    • Using OPENELEC + HYPERION (unchanged from my previous setup with WS2801 leds (change needed?) )
    • Using a 60 led/m WS2812b ledstrip, 206 leds total
    • Tried several drivers & setups in Hyperion, none of them do anything.
    • Tried several sketches that are out there, one sketch gives me the orange start-up swirl. (So the Uno and the strip are wired up correctly). The other sketches dont really do anything.
    • The internal grabber isn't showing anything either.
    • Can see the Arduino when using the lsusb command.
    • Arduino and USB-grabber not on same row of USB's on the Pi.
    My guess is that the connection between the Pi and the Arduino isn't working properly. I have looked up and tried several solutions posted on the forums here, on the Github page and several other pages, but none of them seem to have worked.

    Anyone knows how I can fix this?

    Many thanks!
     
  2. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    918
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino
  3. DanDeVries

    DanDeVries New Member

    Messages:
    8
    Hardware:
    RPi3, +Arduino
    Hi TPModding, thanks for the answer. I have just tried it and although the LED-TEST blinks twice, I get no further response. I set the driver to Adalight and tested all the different OUTPUTS with and without delays. Also made sure the baudrate is same as the one in the sketch (115200). Got any further idea why its still not working?
     
  4. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    918
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino
    could you post your config pls
     
  5. DanDeVries

    DanDeVries New Member

    Messages:
    8
    Hardware:
    RPi3, +Arduino
    Code:
    #include "FastLED.h"
    
    #define ANALOG_MODE_AVERAGE  0
    #define ANALOG_MODE_LAST_LED 1
    
    /**************************************
       S E T U P
       set following values to your needs
    **************************************/
    
    #define INITIAL_LED_TEST_ENABLED true
    #define INITIAL_LED_TEST_BRIGHTNESS 32  // 0..255
    #define INITIAL_LED_TEST_TIME_MS 500  // 10..
    
    // Number of leds in your strip. set to "1" and ANALOG_OUTPUT_ENABLED to "true" to activate analog only
    // As of 26/1/2017:
    // 582 leaves ZERO bytes free and this
    // 410 is ok
    // tested with 500 leds and is fine (despite the warning)
    #define MAX_LEDS 206
    
    // type of your led controller, possible values, see below
    #define LED_TYPE WS2812B
    
    // 3 wire (pwm): NEOPIXEL BTM1829 TM1812 TM1809 TM1804 TM1803 UCS1903 UCS1903B UCS1904 UCS2903 WS2812 WS2852
    //               S2812B SK6812 SK6822 APA106 PL9823 WS2811 WS2813 APA104 WS2811_40 GW6205 GW6205_40 LPD1886 LPD1886_8BIT
    // 4 wire (spi): LPD8806 WS2801 WS2803 SM16716 P9813 APA102 SK9822 DOTSTAR
    
    // For 3 wire led stripes line Neopixel/Ws2812, which have a data line, ground, and power, you just need to define DATA_PIN.
    // For led chipsets that are SPI based (four wires - data, clock, ground, and power), both defines DATA_PIN and CLOCK_PIN are needed
    
    // DATA_PIN, or DATA_PIN, CLOCK_PIN
    #define LED_PINS 6        // 3 wire leds
    //#define LED_PINS 6, 13  // 4 wire leds
    
    #define COLOR_ORDER RGB  // colororder of the stripe, set RGB in hyperion
    
    #define OFF_TIMEOUT 15000    // ms to switch off after no data was received, set 0 to deactivate
    
    // analog rgb uni color led stripe - using of hyperion smoothing is recommended
    // ATTENTION  this pin config is default for atmega328 based arduinos, others might work to
    //            if you have flickering analog leds this might be caused by unsynced pwm signals
    //            try other pins is more or less the only thing that helps
    #define ANALOG_OUTPUT_ENABLED false
    #define ANALOG_MODE           ANALOG_MODE_LAST_LED  // use ANALOG_MODE_AVERAGE or ANALOG_MODE_LAST_LED
    #define ANALOG_GROUND_PIN     8                     // additional ground pin to make wiring a bit easier
    #define ANALOG_RED_PIN        9
    #define ANALOG_GREEN_PIN      10
    #define ANALOG_BLUE_PIN       11
    
    // overall color adjustments
    #define ANALOG_BRIGHTNESS_RED   255              // maximum brightness for analog 0-255
    #define ANALOG_BRIGHTNESS_GREEN 255              // maximum brightness for analog 0-255
    #define ANALOG_BRIGHTNESS_BLUE  255              // maximum brightness for analog 0-255
    
    #define BRIGHTNESS 255                      // maximum brightness 0-255
    #define DITHER_MODE BINARY_DITHER           // BINARY_DITHER or DISABLE_DITHER
    #define COLOR_TEMPERATURE CRGB(255,255,255) // RGB value describing the color temperature
    #define COLOR_CORRECTION  TypicalLEDStrip   // predefined fastled color correction
    //#define COLOR_CORRECTION  CRGB(255,255,255) // or RGB value describing the color correction
    
    // Baudrate, higher rate allows faster refresh rate and more LEDs
    //#define serialRate 460800      // use 115200 for ftdi based boards
    #define serialRate 115200      // use 115200 for ftdi based boards
    //#define serialRate 500000         // use 115200 for ftdi based boards
    
    
    /**************************************
       A D A L I G H T   C O D E
       no user changes needed
    **************************************/
    
    // Adalight sends a "Magic Word" (defined in /etc/boblight.conf) before sending the pixel data
    uint8_t prefix[] = {'A', 'd', 'a'}, hi, lo, chk, i;
    
    unsigned long endTime;
    
    // Define the array of leds
    CRGB leds[MAX_LEDS];
    
    // set rgb to analog led stripe
    void showAnalogRGB(const CRGB& led) {
      if (ANALOG_OUTPUT_ENABLED) {
        byte r = map(led.r, 0,255,0,ANALOG_BRIGHTNESS_RED);
        byte g = map(led.g, 0,255,0,ANALOG_BRIGHTNESS_GREEN);
        byte b = map(led.b, 0,255,0,ANALOG_BRIGHTNESS_BLUE);
        analogWrite(ANALOG_RED_PIN  , r);
        analogWrite(ANALOG_GREEN_PIN, g);
        analogWrite(ANALOG_BLUE_PIN , b);
      }
    }
    
    // set color to all leds
    void showColor(const CRGB& led) {
      #if MAX_LEDS > 1 || ANALOG_OUTPUT_ENABLED == false
      LEDS.showColor(led);
      #endif
      showAnalogRGB(led);
    }
    
    // switch of digital and analog leds
    void switchOff() {
      #if MAX_LEDS > 1 || ANALOG_OUTPUT_ENABLED == false
      memset(leds, 0, MAX_LEDS * sizeof(struct CRGB));
      FastLED.show();
      #endif
      showAnalogRGB(leds[0]);
    }
    
    // function to check if serial data is available
    // if timeout occured leds switch of, if configured
    bool checkIncommingData() {
      boolean dataAvailable = true;
      while (!Serial.available()) {
        if ( OFF_TIMEOUT > 0 && endTime < millis()) {
          switchOff();
          dataAvailable = false;
          endTime = millis() + OFF_TIMEOUT;
        }
      }
    
      return dataAvailable;
    }
    
    // main function that setups and runs the code
    void setup() {
      Serial.begin(serialRate);
    
      // analog output
      if (ANALOG_OUTPUT_ENABLED) {
        // additional ground pin to make wiring a bit easier
        pinMode(ANALOG_GROUND_PIN, OUTPUT);
        digitalWrite(ANALOG_GROUND_PIN, LOW);
        pinMode(ANALOG_BLUE_PIN , OUTPUT);
        pinMode(ANALOG_RED_PIN  , OUTPUT);
        pinMode(ANALOG_GREEN_PIN, OUTPUT);
      }
    
      int ledCount = MAX_LEDS;
      if (ANALOG_MODE == ANALOG_MODE_LAST_LED) {
        ledCount--;
      }
    
      #if MAX_LEDS > 1 || ANALOG_OUTPUT_ENABLED == false
        FastLED.addLeds<LED_TYPE, LED_PINS, COLOR_ORDER>(leds, ledCount);
      #endif
     
      // color adjustments
      FastLED.setBrightness ( BRIGHTNESS );
      FastLED.setTemperature( COLOR_TEMPERATURE );
      FastLED.setCorrection ( COLOR_CORRECTION );
      FastLED.setDither     ( DITHER_MODE );
    
      // initial RGB flash
      #if INITIAL_LED_TEST_ENABLED == true
      for (int v=0;v<INITIAL_LED_TEST_BRIGHTNESS;v++)
      {
        showColor(CRGB(v,v,v)); 
        delay(INITIAL_LED_TEST_TIME_MS/2/INITIAL_LED_TEST_BRIGHTNESS);
      }
      for (int v=0;v<INITIAL_LED_TEST_BRIGHTNESS;v++)
      {
        showColor(CRGB(v,v,v)); 
        delay(INITIAL_LED_TEST_TIME_MS/2/INITIAL_LED_TEST_BRIGHTNESS);
      }
      #endif
      showColor(CRGB(0, 0, 0));
    
      Serial.print("Ada\n"); // Send "Magic Word" string to host
    
    
      boolean transmissionSuccess;
      unsigned long sum_r, sum_g, sum_b;
    
      // loop() is avoided as even that small bit of function overhead
      // has a measurable impact on this code's overall throughput.
      for(;;) {
        // wait for first byte of Magic Word
        for (i = 0; i < sizeof prefix; ++i) {
          // If next byte is not in Magic Word, the start over
          if (!checkIncommingData() || prefix[i] != Serial.read()) {
            i = 0;
          }
        }
    
        // Hi, Lo, Checksum
        if (!checkIncommingData()) continue;
        hi = Serial.read();
        if (!checkIncommingData()) continue;
        lo = Serial.read();
        if (!checkIncommingData()) continue;
        chk = Serial.read();
    
        // if checksum does not match go back to wait
        if (chk != (hi ^ lo ^ 0x55)) continue;
    
        memset(leds, 0, MAX_LEDS * sizeof(struct CRGB));
        transmissionSuccess = true;
        sum_r = 0;
        sum_g = 0;
        sum_b = 0;
    
        int num_leds = min ( MAX_LEDS, (hi<<8) + lo + 1 );
    
        // read the transmission data and set LED values
        for (int idx = 0; idx < num_leds; idx++) {
          byte r, g, b;
          if (!checkIncommingData()) {
            transmissionSuccess = false;
            break;
          }
          r = Serial.read();
          if (!checkIncommingData()) {
            transmissionSuccess = false;
            break;
          }
          g = Serial.read();
          if (!checkIncommingData()) {
            transmissionSuccess = false;
            break;
          }
          b = Serial.read();
          leds[idx].r = r;
          leds[idx].g = g;
          leds[idx].b = b;
          #if ANALOG_OUTPUT_ENABLED == true && ANALOG_MODE == ANALOG_MODE_AVERAGE
              sum_r += r;
              sum_g += g;
              sum_b += b;
          #endif
        }
    
        // shows new values
        if (transmissionSuccess) {
          endTime = millis() + OFF_TIMEOUT;
          #if MAX_LEDS > 1 || ANALOG_OUTPUT_ENABLED == false
          FastLED.show();
          #endif
    
          #if ANALOG_OUTPUT_ENABLED == true
            #if ANALOG_MODE == ANALOG_MODE_LAST_LED
              showAnalogRGB(leds[MAX_LEDS-1]);
            #else
              showAnalogRGB(CRGB(sum_r/MAX_LEDS, sum_g/MAX_LEDS, sum_b/MAX_LEDS));
             #endif
          #endif
        }
      }
    } // end of setup
    
    void loop() {
      // Not used. See note in setup() function.
    }

    Code:
    // Automatically generated configuration file for Hyperion ambilight daemon
    // Notice: All values are explained with comments at our wiki: wiki.hyperion-project.org (config area)
    // Generated by: HyperCon (The Hyperion deamon configuration file builder)
    // Created with HyperCon V1.03.3 (22.10.2017)
    
    {
        // DEVICE CONFIGURATION
        "device" :
        {
            "name"       : "MyHyperionConfig",
            "type"       : "adalight",
            "output"     : "/dev/ttyS0",
            "rate"     : 115200,
            "delayAfterConnect"     : 0,
            "colorOrder" : "rgb"
        },
    
        // COLOR CALIBRATION CONFIG
        "color" :
        {
            "channelAdjustment" :
            [
                {
                    "id"   : "default",
                    "leds" : "*",
                    "pureRed" :
                    {
                        "redChannel"        : 255,
                        "greenChannel"        : 0,
                        "blueChannel"        : 0
                    },
                    "pureGreen" :
                    {
                        "redChannel"        : 0,
                        "greenChannel"        : 255,
                        "blueChannel"        : 0
                    },
                    "pureBlue" :
                    {
                        "redChannel"        : 0,
                        "greenChannel"        : 0,
                        "blueChannel"        : 255
                    }
                }
            ],
            "temperature" :
            [
                {
                    "id"   : "default",
                    "leds" : "*",
                    "correctionValues" :
                    {
                        "red"     : 255,
                        "green"    : 255,
                        "blue"     : 255
                    }
                }
            ],
            "transform" :
            [
                {
                    "id"   : "default",
                    "leds" : "*",
                    "hsl" :
                    {
                        "saturationGain"    : 1.0000,
                        "luminanceGain"        : 1.0000,
                        "luminanceMinimum"        : 0.0000
                    },
                    "red" :
                    {
                        "threshold"     : 0.0000,
                        "gamma"         : 2.5000
                    },
                    "green" :
                    {
                        "threshold"     : 0.0000,
                        "gamma"         : 2.5000
                    },
                    "blue" :
                    {
                        "threshold"     : 0.0000,
                        "gamma"         : 2.5000
                    }
                }
            ],
        // SMOOTHING CONFIG
            "smoothing" :
            {
                "type"            : "linear",
                "time_ms"         : 200,
                "updateFrequency" : 20.0000,
                "updateDelay"     : 0
            }
        },
    
        // V4L2 GRABBER CONFIG
        "grabber-v4l2" :
        {
            "device" : "/dev/video0",
            "input" : 0,
            "standard" : "NTSC",
            "width" : -1,
            "height" : -1,
            "frameDecimation" : 2,
            "sizeDecimation" : 8,
            "priority" : 900,
            "mode" : "2D",
            "cropLeft" : 0,
            "cropRight" : 0,
            "cropTop" : 0,
            "cropBottom" : 0,
            "redSignalThreshold" : 0.0,
            "greenSignalThreshold" : 0.0,
            "blueSignalThreshold" : 0.0
        },
    
        // BLACKBORDER CONFIG
        "blackborderdetector" :
        {
            "enable" : true,
            "threshold" : 0.0,
            "unknownFrameCnt" : 600,
            "borderFrameCnt" : 50,
            "maxInconsistentCnt" : 10,
            "blurRemoveCnt" : 1,
            "mode" : "default"
        },
    
        // BOOTEFFECT CONFIG
        "bootsequence" :
        {
            "color" : [0,0,0],
            "effect" : "Rainbow swirl fast",
            "duration_ms" : 3000,
            "priority" : 700
        },
    
        // JSON SERVER CONFIG
        "jsonServer" :
        {
            "port" : 19444
        },
    
        // PROTO SERVER CONFIG
        "protoServer" :
        {
            "port" : 19445
        },
    
        // EFFECT PATH
        "effects" :
        {
            "paths" :
            [
                "/storage/hyperion/effects",
                "/usr/share/hyperion/effects"
            ]
        },
    
        // NO FRAME GRABBER CONFIG
        // NO KODI CHECK CONFIG
        // NO BOBLIGHT SERVER CONFIG
        // NO JSON/PROTO FORWARD CONFIG
    
        // LED CONFIGURATION
        "leds" :
        [
            {
                "index" : 0,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.9737, "maximum" : 1.0000 }
            },
            {
                "index" : 1,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.9474, "maximum" : 0.9737 }
            },
            {
                "index" : 2,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.9211, "maximum" : 0.9474 }
            },
            {
                "index" : 3,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.8947, "maximum" : 0.9211 }
            },
            {
                "index" : 4,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.8684, "maximum" : 0.8947 }
            },
            {
                "index" : 5,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.8421, "maximum" : 0.8684 }
            },
            {
                "index" : 6,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.8158, "maximum" : 0.8421 }
            },
            {
                "index" : 7,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.7895, "maximum" : 0.8158 }
            },
            {
                "index" : 8,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.7632, "maximum" : 0.7895 }
            },
            {
                "index" : 9,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.7368, "maximum" : 0.7632 }
            },
            {
                "index" : 10,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.7105, "maximum" : 0.7368 }
            },
            {
                "index" : 11,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.6842, "maximum" : 0.7105 }
            },
            {
                "index" : 12,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.6579, "maximum" : 0.6842 }
            },
            {
                "index" : 13,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.6316, "maximum" : 0.6579 }
            },
            {
                "index" : 14,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.6053, "maximum" : 0.6316 }
            },
            {
                "index" : 15,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.5789, "maximum" : 0.6053 }
            },
            {
                "index" : 16,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.5526, "maximum" : 0.5789 }
            },
            {
                "index" : 17,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.5263, "maximum" : 0.5526 }
            },
            {
                "index" : 18,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.5000, "maximum" : 0.5263 }
            },
            {
                "index" : 19,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.4737, "maximum" : 0.5000 }
            },
            {
                "index" : 20,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.4474, "maximum" : 0.4737 }
            },
            {
                "index" : 21,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.4211, "maximum" : 0.4474 }
            },
            {
                "index" : 22,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.3947, "maximum" : 0.4211 }
            },
            {
                "index" : 23,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.3684, "maximum" : 0.3947 }
            },
            {
                "index" : 24,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.3421, "maximum" : 0.3684 }
            },
            {
                "index" : 25,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.3158, "maximum" : 0.3421 }
            },
            {
                "index" : 26,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.2895, "maximum" : 0.3158 }
            },
            {
                "index" : 27,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.2632, "maximum" : 0.2895 }
            },
            {
                "index" : 28,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.2368, "maximum" : 0.2632 }
            },
            {
                "index" : 29,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.2105, "maximum" : 0.2368 }
            },
            {
                "index" : 30,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.1842, "maximum" : 0.2105 }
            },
            {
                "index" : 31,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.1579, "maximum" : 0.1842 }
            },
            {
                "index" : 32,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.1316, "maximum" : 0.1579 }
            },
            {
                "index" : 33,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.1053, "maximum" : 0.1316 }
            },
            {
                "index" : 34,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.0789, "maximum" : 0.1053 }
            },
            {
                "index" : 35,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.0526, "maximum" : 0.0789 }
            },
            {
                "index" : 36,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.0263, "maximum" : 0.0526 }
            },
            {
                "index" : 37,
                "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0263 }
            },
            {
                "index" : 38,
                "hscan" : { "minimum" : 0.9846, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 39,
                "hscan" : { "minimum" : 0.9692, "maximum" : 0.9846 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 40,
                "hscan" : { "minimum" : 0.9538, "maximum" : 0.9692 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 41,
                "hscan" : { "minimum" : 0.9385, "maximum" : 0.9538 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 42,
                "hscan" : { "minimum" : 0.9231, "maximum" : 0.9385 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 43,
                "hscan" : { "minimum" : 0.9077, "maximum" : 0.9231 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 44,
                "hscan" : { "minimum" : 0.8923, "maximum" : 0.9077 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 45,
                "hscan" : { "minimum" : 0.8769, "maximum" : 0.8923 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 46,
                "hscan" : { "minimum" : 0.8615, "maximum" : 0.8769 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 47,
                "hscan" : { "minimum" : 0.8462, "maximum" : 0.8615 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 48,
                "hscan" : { "minimum" : 0.8308, "maximum" : 0.8462 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 49,
                "hscan" : { "minimum" : 0.8154, "maximum" : 0.8308 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 50,
                "hscan" : { "minimum" : 0.8000, "maximum" : 0.8154 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 51,
                "hscan" : { "minimum" : 0.7846, "maximum" : 0.8000 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 52,
                "hscan" : { "minimum" : 0.7692, "maximum" : 0.7846 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 53,
                "hscan" : { "minimum" : 0.7538, "maximum" : 0.7692 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 54,
                "hscan" : { "minimum" : 0.7385, "maximum" : 0.7538 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 55,
                "hscan" : { "minimum" : 0.7231, "maximum" : 0.7385 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 56,
                "hscan" : { "minimum" : 0.7077, "maximum" : 0.7231 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 57,
                "hscan" : { "minimum" : 0.6923, "maximum" : 0.7077 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 58,
                "hscan" : { "minimum" : 0.6769, "maximum" : 0.6923 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 59,
                "hscan" : { "minimum" : 0.6615, "maximum" : 0.6769 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 60,
                "hscan" : { "minimum" : 0.6462, "maximum" : 0.6615 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 61,
                "hscan" : { "minimum" : 0.6308, "maximum" : 0.6462 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 62,
                "hscan" : { "minimum" : 0.6154, "maximum" : 0.6308 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 63,
                "hscan" : { "minimum" : 0.6000, "maximum" : 0.6154 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 64,
                "hscan" : { "minimum" : 0.5846, "maximum" : 0.6000 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 65,
                "hscan" : { "minimum" : 0.5692, "maximum" : 0.5846 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 66,
                "hscan" : { "minimum" : 0.5538, "maximum" : 0.5692 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 67,
                "hscan" : { "minimum" : 0.5385, "maximum" : 0.5538 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 68,
                "hscan" : { "minimum" : 0.5231, "maximum" : 0.5385 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 69,
                "hscan" : { "minimum" : 0.5077, "maximum" : 0.5231 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 70,
                "hscan" : { "minimum" : 0.4923, "maximum" : 0.5077 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 71,
                "hscan" : { "minimum" : 0.4769, "maximum" : 0.4923 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 72,
                "hscan" : { "minimum" : 0.4615, "maximum" : 0.4769 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 73,
                "hscan" : { "minimum" : 0.4462, "maximum" : 0.4615 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 74,
                "hscan" : { "minimum" : 0.4308, "maximum" : 0.4462 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 75,
                "hscan" : { "minimum" : 0.4154, "maximum" : 0.4308 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 76,
                "hscan" : { "minimum" : 0.4000, "maximum" : 0.4154 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 77,
                "hscan" : { "minimum" : 0.3846, "maximum" : 0.4000 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 78,
                "hscan" : { "minimum" : 0.3692, "maximum" : 0.3846 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 79,
                "hscan" : { "minimum" : 0.3538, "maximum" : 0.3692 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 80,
                "hscan" : { "minimum" : 0.3385, "maximum" : 0.3538 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 81,
                "hscan" : { "minimum" : 0.3231, "maximum" : 0.3385 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 82,
                "hscan" : { "minimum" : 0.3077, "maximum" : 0.3231 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 83,
                "hscan" : { "minimum" : 0.2923, "maximum" : 0.3077 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 84,
                "hscan" : { "minimum" : 0.2769, "maximum" : 0.2923 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 85,
                "hscan" : { "minimum" : 0.2615, "maximum" : 0.2769 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 86,
                "hscan" : { "minimum" : 0.2462, "maximum" : 0.2615 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 87,
                "hscan" : { "minimum" : 0.2308, "maximum" : 0.2462 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 88,
                "hscan" : { "minimum" : 0.2154, "maximum" : 0.2308 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 89,
                "hscan" : { "minimum" : 0.2000, "maximum" : 0.2154 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 90,
                "hscan" : { "minimum" : 0.1846, "maximum" : 0.2000 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 91,
                "hscan" : { "minimum" : 0.1692, "maximum" : 0.1846 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 92,
                "hscan" : { "minimum" : 0.1538, "maximum" : 0.1692 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 93,
                "hscan" : { "minimum" : 0.1385, "maximum" : 0.1538 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 94,
                "hscan" : { "minimum" : 0.1231, "maximum" : 0.1385 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 95,
                "hscan" : { "minimum" : 0.1077, "maximum" : 0.1231 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 96,
                "hscan" : { "minimum" : 0.0923, "maximum" : 0.1077 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 97,
                "hscan" : { "minimum" : 0.0769, "maximum" : 0.0923 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 98,
                "hscan" : { "minimum" : 0.0615, "maximum" : 0.0769 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 99,
                "hscan" : { "minimum" : 0.0462, "maximum" : 0.0615 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 100,
                "hscan" : { "minimum" : 0.0308, "maximum" : 0.0462 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 101,
                "hscan" : { "minimum" : 0.0154, "maximum" : 0.0308 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 102,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0154 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
            },
            {
                "index" : 103,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.0000, "maximum" : 0.0263 }
            },
            {
                "index" : 104,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.0263, "maximum" : 0.0526 }
            },
            {
                "index" : 105,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.0526, "maximum" : 0.0789 }
            },
            {
                "index" : 106,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.0789, "maximum" : 0.1053 }
            },
            {
                "index" : 107,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.1053, "maximum" : 0.1316 }
            },
            {
                "index" : 108,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.1316, "maximum" : 0.1579 }
            },
            {
                "index" : 109,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.1579, "maximum" : 0.1842 }
            },
            {
                "index" : 110,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.1842, "maximum" : 0.2105 }
            },
            {
                "index" : 111,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.2105, "maximum" : 0.2368 }
            },
            {
                "index" : 112,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.2368, "maximum" : 0.2632 }
            },
            {
                "index" : 113,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.2632, "maximum" : 0.2895 }
            },
            {
                "index" : 114,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.2895, "maximum" : 0.3158 }
            },
            {
                "index" : 115,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.3158, "maximum" : 0.3421 }
            },
            {
                "index" : 116,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.3421, "maximum" : 0.3684 }
            },
            {
                "index" : 117,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.3684, "maximum" : 0.3947 }
            },
            {
                "index" : 118,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.3947, "maximum" : 0.4211 }
            },
            {
                "index" : 119,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.4211, "maximum" : 0.4474 }
            },
            {
                "index" : 120,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.4474, "maximum" : 0.4737 }
            },
            {
                "index" : 121,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.4737, "maximum" : 0.5000 }
            },
            {
                "index" : 122,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.5000, "maximum" : 0.5263 }
            },
            {
                "index" : 123,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.5263, "maximum" : 0.5526 }
            },
            {
                "index" : 124,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.5526, "maximum" : 0.5789 }
            },
            {
                "index" : 125,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.5789, "maximum" : 0.6053 }
            },
            {
                "index" : 126,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.6053, "maximum" : 0.6316 }
            },
            {
                "index" : 127,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.6316, "maximum" : 0.6579 }
            },
            {
                "index" : 128,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.6579, "maximum" : 0.6842 }
            },
            {
                "index" : 129,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.6842, "maximum" : 0.7105 }
            },
            {
                "index" : 130,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.7105, "maximum" : 0.7368 }
            },
            {
                "index" : 131,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.7368, "maximum" : 0.7632 }
            },
            {
                "index" : 132,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.7632, "maximum" : 0.7895 }
            },
            {
                "index" : 133,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.7895, "maximum" : 0.8158 }
            },
            {
                "index" : 134,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.8158, "maximum" : 0.8421 }
            },
            {
                "index" : 135,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.8421, "maximum" : 0.8684 }
            },
            {
                "index" : 136,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.8684, "maximum" : 0.8947 }
            },
            {
                "index" : 137,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.8947, "maximum" : 0.9211 }
            },
            {
                "index" : 138,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.9211, "maximum" : 0.9474 }
            },
            {
                "index" : 139,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.9474, "maximum" : 0.9737 }
            },
            {
                "index" : 140,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
                "vscan" : { "minimum" : 0.9737, "maximum" : 1.0000 }
            },
            {
                "index" : 141,
                "hscan" : { "minimum" : 0.0000, "maximum" : 0.0154 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 142,
                "hscan" : { "minimum" : 0.0154, "maximum" : 0.0308 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 143,
                "hscan" : { "minimum" : 0.0308, "maximum" : 0.0462 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 144,
                "hscan" : { "minimum" : 0.0462, "maximum" : 0.0615 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 145,
                "hscan" : { "minimum" : 0.0615, "maximum" : 0.0769 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 146,
                "hscan" : { "minimum" : 0.0769, "maximum" : 0.0923 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 147,
                "hscan" : { "minimum" : 0.0923, "maximum" : 0.1077 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 148,
                "hscan" : { "minimum" : 0.1077, "maximum" : 0.1231 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 149,
                "hscan" : { "minimum" : 0.1231, "maximum" : 0.1385 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 150,
                "hscan" : { "minimum" : 0.1385, "maximum" : 0.1538 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 151,
                "hscan" : { "minimum" : 0.1538, "maximum" : 0.1692 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 152,
                "hscan" : { "minimum" : 0.1692, "maximum" : 0.1846 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 153,
                "hscan" : { "minimum" : 0.1846, "maximum" : 0.2000 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 154,
                "hscan" : { "minimum" : 0.2000, "maximum" : 0.2154 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 155,
                "hscan" : { "minimum" : 0.2154, "maximum" : 0.2308 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 156,
                "hscan" : { "minimum" : 0.2308, "maximum" : 0.2462 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 157,
                "hscan" : { "minimum" : 0.2462, "maximum" : 0.2615 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 158,
                "hscan" : { "minimum" : 0.2615, "maximum" : 0.2769 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 159,
                "hscan" : { "minimum" : 0.2769, "maximum" : 0.2923 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 160,
                "hscan" : { "minimum" : 0.2923, "maximum" : 0.3077 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 161,
                "hscan" : { "minimum" : 0.3077, "maximum" : 0.3231 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 162,
                "hscan" : { "minimum" : 0.3231, "maximum" : 0.3385 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 163,
                "hscan" : { "minimum" : 0.3385, "maximum" : 0.3538 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 164,
                "hscan" : { "minimum" : 0.3538, "maximum" : 0.3692 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 165,
                "hscan" : { "minimum" : 0.3692, "maximum" : 0.3846 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 166,
                "hscan" : { "minimum" : 0.3846, "maximum" : 0.4000 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 167,
                "hscan" : { "minimum" : 0.4000, "maximum" : 0.4154 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 168,
                "hscan" : { "minimum" : 0.4154, "maximum" : 0.4308 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 169,
                "hscan" : { "minimum" : 0.4308, "maximum" : 0.4462 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 170,
                "hscan" : { "minimum" : 0.4462, "maximum" : 0.4615 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 171,
                "hscan" : { "minimum" : 0.4615, "maximum" : 0.4769 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 172,
                "hscan" : { "minimum" : 0.4769, "maximum" : 0.4923 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 173,
                "hscan" : { "minimum" : 0.4923, "maximum" : 0.5077 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 174,
                "hscan" : { "minimum" : 0.5077, "maximum" : 0.5231 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 175,
                "hscan" : { "minimum" : 0.5231, "maximum" : 0.5385 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 176,
                "hscan" : { "minimum" : 0.5385, "maximum" : 0.5538 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 177,
                "hscan" : { "minimum" : 0.5538, "maximum" : 0.5692 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 178,
                "hscan" : { "minimum" : 0.5692, "maximum" : 0.5846 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 179,
                "hscan" : { "minimum" : 0.5846, "maximum" : 0.6000 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 180,
                "hscan" : { "minimum" : 0.6000, "maximum" : 0.6154 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 181,
                "hscan" : { "minimum" : 0.6154, "maximum" : 0.6308 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 182,
                "hscan" : { "minimum" : 0.6308, "maximum" : 0.6462 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 183,
                "hscan" : { "minimum" : 0.6462, "maximum" : 0.6615 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 184,
                "hscan" : { "minimum" : 0.6615, "maximum" : 0.6769 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 185,
                "hscan" : { "minimum" : 0.6769, "maximum" : 0.6923 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 186,
                "hscan" : { "minimum" : 0.6923, "maximum" : 0.7077 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 187,
                "hscan" : { "minimum" : 0.7077, "maximum" : 0.7231 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 188,
                "hscan" : { "minimum" : 0.7231, "maximum" : 0.7385 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 189,
                "hscan" : { "minimum" : 0.7385, "maximum" : 0.7538 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 190,
                "hscan" : { "minimum" : 0.7538, "maximum" : 0.7692 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 191,
                "hscan" : { "minimum" : 0.7692, "maximum" : 0.7846 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 192,
                "hscan" : { "minimum" : 0.7846, "maximum" : 0.8000 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 193,
                "hscan" : { "minimum" : 0.8000, "maximum" : 0.8154 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 194,
                "hscan" : { "minimum" : 0.8154, "maximum" : 0.8308 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 195,
                "hscan" : { "minimum" : 0.8308, "maximum" : 0.8462 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 196,
                "hscan" : { "minimum" : 0.8462, "maximum" : 0.8615 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 197,
                "hscan" : { "minimum" : 0.8615, "maximum" : 0.8769 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 198,
                "hscan" : { "minimum" : 0.8769, "maximum" : 0.8923 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 199,
                "hscan" : { "minimum" : 0.8923, "maximum" : 0.9077 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 200,
                "hscan" : { "minimum" : 0.9077, "maximum" : 0.9231 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 201,
                "hscan" : { "minimum" : 0.9231, "maximum" : 0.9385 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 202,
                "hscan" : { "minimum" : 0.9385, "maximum" : 0.9538 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 203,
                "hscan" : { "minimum" : 0.9538, "maximum" : 0.9692 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 204,
                "hscan" : { "minimum" : 0.9692, "maximum" : 0.9846 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            },
            {
                "index" : 205,
                "hscan" : { "minimum" : 0.9846, "maximum" : 1.0000 },
                "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
            }
        ],
    
        "endOfJson" : "endOfJson"
    }
    
     
  6. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    918
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino
    as i mentioned before,
    "delayAfterConnect" : 0,
    increase this value, try
    "delayAfterConnect" : 10,
     
  7. DanDeVries

    DanDeVries New Member

    Messages:
    8
    Hardware:
    RPi3, +Arduino
    I have adjusted the "delayAfterConnect" to 10 in the config file directly, uploaded it, but no changes.

    (Weird thing is if I change the delay in Hyperion to 10 itself, it doesnt result in a change in the config file)
    [​IMG]
    [​IMG]
     
  8. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    918
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino
    did you try to send a color to the pi? with the ssh-tab for example, only to see if the leds work
     
  9. DanDeVries

    DanDeVries New Member

    Messages:
    8
    Hardware:
    RPi3, +Arduino
    I just tried that, but no response. The only response I get so far is the 2 flashes when the Arduino boots. Maybe this SSH log from Hyperion can shed a bit more light on the problem? Thanks a lot for the help so far!
    Code:
    sftp Send Hyperion Config - Sourcepath: C:/Users/User/Desktop, Targetpath: /storage/.config/, Filename: hyperion.config.json
    ssh out:     /storage/hyperion/bin/hyperion-remote.sh  -c ff63eb
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
    ssh in:         build time: Jun  3 2017 02:06:16
    ssh in:     Connected to localhost:19444
    ssh in:     Set color to 255 99 235
    ssh out:     /storage/hyperion/bin/hyperion-remote.sh  -c 975bff
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
    ssh in:         build time: Jun  3 2017 02:06:16
    ssh in:     Connected to localhost:19444
    ssh in:     Set color to 151 91 255
    ssh out:     /storage/hyperion/bin/hyperion-remote.sh  -c 975bff
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
    ssh in:         build time: Jun  3 2017 02:06:16
    ssh in:     Connected to localhost:19444
    ssh in:     Set color to 151 91 255
    ssh disconnected
    ssh connected
    ssh out:     cat /storage/logfiles/hyperion.log
    ssh in:     Hyperion Ambilight Deamon (452)
    ssh in:         Version   : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
    ssh in:         Build Time: Jun  3 2017 02:06:37
    ssh in:     INFO: Selected configuration file: /storage/.config/hyperion.config.json
    ssh in:     HYPERION INFO: ColorTransform 'default' => [0; 205]
    ssh in:     HYPERION INFO: ColorCorrection 'default' => [0; 205]
    ssh in:     HYPERION INFO: ColorAdjustment 'default' => [0; 205]
    ssh in:     LEDDEVICE INFO: configuration: 
    ssh in:     {
    ssh in:         "colorOrder" : "rgb",
    ssh in:         "delayAfterConnect" : 0,
    ssh in:         "name" : "MyHyperionConfig",
    ssh in:         "output" : "/dev/ttyS0",
    ssh in:         "rate" : 115200,
    ssh in:         "type" : "adalight"
    ssh in:     }
    ssh in:     Opening UART: /dev/ttyS0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     INFO: Creating linear smoothing
    ssh in:     HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
    ssh in:     EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
    ssh in:     EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     INFO: Hyperion started and initialised
    ssh in:     INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     BLACKBORDER INFO: mode:default
    ssh in:     started
    ssh in:     INFO: Json server created and started on port 19444
    ssh in:     INFO: Proto server created and started on port 19445
    ssh in:     V4L2GRABBER INFO: width=720 height=480
    ssh in:     V4L2GRABBER INFO: pixel format=UYVY
    ssh in:     BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     BLACKBORDER INFO: mode:default
    ssh in:     V4L2GRABBER INFO: signal threshold set to: {0,0,0}
    ssh in:     V4L2GRABBER INFO: started
    ssh in:     INFO: V4L2 grabber created and started
    ssh in:     Opening UART: /dev/ttyS0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
    ssh in:     V4L2GRABBER ERROR: Frame too small: 689000 != 691200
    ssh in:     BORDER SWITCH REQUIRED!!
    ssh in:     CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690548 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690104 != 691200
    ssh in:     V4L2GRABBER INFO: stopped
    ssh in:     EFFECTENGINE INFO: effect finished
    ssh in:     V4L2GRABBER INFO: started
    ssh in:     Device unblocked
    ssh in:     Opening UART: /dev/ttyS0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
    ssh in:     V4L2GRABBER ERROR: Frame too small: 688886 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690170 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 689900 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690644 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690526 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690170 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690422 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690204 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 689998 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 687342 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690334 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690054 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690312 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 687700 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 688630 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690452 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690464 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 689896 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690394 != 691200
    ssh in:     Device unblocked
    ssh in:     Opening UART: /dev/ttyS0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
    ssh in:     V4L2GRABBER INFO: Signal lost
    ssh in:     V4L2GRABBER ERROR: Frame too small: 689972 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690258 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690458 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690582 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 689526 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 689896 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690018 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 689212 != 691200
    ssh in:     Device unblocked
    ssh in:     Opening UART: /dev/ttyS0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
    ssh in:     Device unblocked
    ssh in:     Opening UART: /dev/ttyS0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690142 != 691200
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690504 != 691200
    ssh in:     Device unblocked
    ssh in:     Opening UART: /dev/ttyS0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
    ssh in:     Device unblocked
    ssh in:     Opening UART: /dev/ttyS0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
    ssh in:     V4L2GRABBER ERROR: Frame too small: 689888 != 691200
    ssh in:     Device unblocked
    ssh in:     Opening UART: /dev/ttyS0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
    ssh in:     Device unblocked
    ssh in:     Opening UART: /dev/ttyS0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690050 != 691200
    ssh in:     Device unblocked
    ssh in:     Opening UART: /dev/ttyS0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
    ssh in:     Device unblocked
    ssh in:     Opening UART: /dev/ttyS0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
    ssh in:     Device unblocked
    ssh in:     Opening UART: /dev/ttyS0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
    ssh in:     Device unblocked
    ssh in:     Opening UART: /dev/ttyS0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
    ssh in:     Device unblocked
    ssh in:     Opening UART: /dev/ttyS0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
    
     
  10. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    918
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino
    and you are sure it is
    /dev/ttyS0 ?
     
  11. DanDeVries

    DanDeVries New Member

    Messages:
    8
    Hardware:
    RPi3, +Arduino
    No, I unplugged and plugged it back in, its ACM0, which I also tried, but that one isnt working either.

    With Arduino UNPLUGGED:
    [​IMG]
    With Arduino PLUGGED IN:
    [​IMG]

    Log with ACM0:
    Code:
    ssh in:     INFO: Application closed with code 0
    ssh in:     EFFECTENGINE INFO: Cleaning up Python interpreter
    ssh out:     /storage/.config/autostart.sh > /dev/null 2>&1 &
    ssh out:     cat /storage/logfiles/hyperion.log
    ssh in:     Hyperion Ambilight Deamon (807)
    ssh in:         Version   : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
    ssh in:         Build Time: Jun  3 2017 02:06:37
    ssh in:     INFO: Selected configuration file: /storage/.config/hyperion.config.json
    ssh in:     HYPERION INFO: ColorTransform 'default' => [0; 205]
    ssh in:     HYPERION INFO: ColorCorrection 'default' => [0; 205]
    ssh in:     HYPERION INFO: ColorAdjustment 'default' => [0; 205]
    ssh in:     LEDDEVICE INFO: configuration:
    ssh in:     {
    ssh in:         "colorOrder" : "rgb",
    ssh in:         "delayAfterConnect" : 0,
    ssh in:         "name" : "MyHyperionConfig",
    ssh in:         "output" : "/dev/ttyACM0",
    ssh in:         "rate" : 115200,
    ssh in:         "type" : "adalight"
    ssh in:     }
    ssh in:     Opening UART: /dev/ttyACM0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     INFO: Creating linear smoothing
    ssh in:     HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
    ssh in:     EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
    ssh in:     EFFECTENGINE INFO: Initializing Python interpreter
    ssh in:     INFO: Hyperion started and initialised
    ssh in:     INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in:     BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     BLACKBORDER INFO: mode:default
    ssh in:     started
    ssh in:     INFO: Json server created and started on port 19444
    ssh in:     INFO: Proto server created and started on port 19445
    ssh in:     V4L2GRABBER INFO: width=720 height=480
    ssh in:     V4L2GRABBER INFO: pixel format=UYVY
    ssh in:     BLACKBORDER INFO: threshold set to 0 (0)
    ssh in:     BLACKBORDER INFO: mode:default
    ssh in:     V4L2GRABBER INFO: signal threshold set to: {0,0,0}
    ssh in:     V4L2GRABBER INFO: started
    ssh in:     INFO: V4L2 grabber created and started
    ssh in:     Opening UART: /dev/ttyACM0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
    ssh in:     BORDER SWITCH REQUIRED!!
    ssh in:     CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
    ssh in:     V4L2GRABBER INFO: stopped
    ssh in:     Device unblocked
    ssh in:     EFFECTENGINE INFO: effect finished
    ssh in:     Opening UART: /dev/ttyACM0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
    ssh in:     V4L2GRABBER INFO: started
    ssh in:     V4L2GRABBER ERROR: Frame too small: 689996 != 691200
    ssh in:     Device unblocked
    ssh in:     Opening UART: /dev/ttyACM0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
    ssh in:     V4L2GRABBER INFO: Signal lost
    ssh in:     V4L2GRABBER ERROR: Frame too small: 690092 != 691200
    ssh in:     Device unblocked
    ssh in:     Opening UART: /dev/ttyACM0
    ssh in:     Unable to open RS232 device (IO Exception (2): No such file or directory, file /home/sascha/hyperion/dependencies/build/serial/src/impl/unix.cc, line 100.)
    ssh in:     Device blocked for 3000 ms
     
  12. DanDeVries

    DanDeVries New Member

    Messages:
    8
    Hardware:
    RPi3, +Arduino
    I have no idea what I did exactly, but I got the rainbow swirl now for booting. However, all the led's are blinking like mad, power issues?
     
  13. DanDeVries

    DanDeVries New Member

    Messages:
    8
    Hardware:
    RPi3, +Arduino
    I think I got it all sorted out now, error was probably in the ACM0 not configured right. Gonna test it out further tomorrow. Thanks for the help @TPmodding !
     
    • Like Like x 1