1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Not installed via HyperCon

Discussion in 'Bug Reports' started by the_stig, 6 August 2016.

  1. the_stig

    the_stig New Member

    Messages:
    23
    Hardware:
    RPi2
    Hey Guys,

    I needed to reinstall raspian. On a fresh install of raspian I startet the installation of Hyperion via HyperCon and log tells me install was fine. But afterwards I always get "unable to connect to host" when trying to get a colour going. Log attached. No files in etc/hyperion although log tells me config.json was uploaded. No files in /opt. Any ideas from your side?

    EDIT: What are these strange symbols before the paths?
    Code:
    SSH Traffic:
    ssh connected
    ssh out:     cd /tmp && wget -nv -N https://raw.github.com/hyperion-project/hyperion/master/bin/remove_hyperion.sh && chmod +x remove_hyperion.sh && sudo sh ./remove_hyperion.sh HyperConRemove ; rm remove_hyperion.sh
    ssh out:     Last-modified header missing -- time-stamps turned off.
    ssh out:     2016-08-06 15:30:32 URL:https://raw.githubusercontent.com/hyperion-project/hyperion/master/bin/remove_hyperion.sh [4083/4083] -> "remove_hyperion.sh" [1]
    ssh in:     *******************************************************************************
    ssh in:     This script will remove Hyperion and itᅡᄡs services
    ssh in:     -----> Please BACKUP your hyperion.config.json if necessary <-----
    ssh in:     Created by brindosch - hyperion-project.org - the official Hyperion source.
    ssh in:     *******************************************************************************
    ssh in:     ---> Stop Hyperion, if necessary
    ssh in:     ---> Delete and disable Hyperion systemd script
    ssh out:     Removed symlink /etc/systemd/system/multi-user.target.wants/hyperion.service.
    ssh in:     removed ¬タリ/etc/systemd/system/hyperion.service¬タル
    ssh in:     ---> Remove links to the binaries
    ssh in:     removed ¬タリ/usr/bin/hyperiond¬タル
    ssh in:     removed ¬タリ/usr/bin/hyperion-remote¬タル
    ssh in:     removed ¬タリ/usr/bin/hyperion-v4l2¬タル
    ssh in:     removed ¬タリ/usr/bin/hyperion-dispmanx¬タル
    ssh in:     removed ¬タリ/usr/bin/hyperion-x11¬タル
    ssh in:     removed ¬タリ/usr/bin/hyperion-aml¬タル
    ssh in:     ---> Remove binaries
    ssh in:     removed directory: ¬タリ/etc/hyperion¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/mood-blobs-warm.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/udp-mcast.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/rainbow-swirl.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/mood-blobs-green.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/snake.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/strobe.py¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/running_dots.py¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/fade.py¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/knight-rider.py¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/mood-blobs-red.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/strobe-blue.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/police-lights-single.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/mood-blobs-blue.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/cinema-fade-off.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/sparks.py¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/sparks-color.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/running_dots.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/random.py¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/mood-blobs.py¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/rainbow-mood.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/rainbow-swirl.py¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/mood-blobs-full.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/knight-rider.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/rainbow-swirl-fast.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/police.py¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/sparks.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/shutdown.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/mood-blobs-cold.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/rainbow-mood.py¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/shutdown.py¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/traces.py¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/x-mas.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/udp.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/police-lights-solid.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/udp.py¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/random.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/strobe-white.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/snake.py¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/traces.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/x-mas.py¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/strobe-raspbmc.json¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/effects/cinema-fade-in.json¬タル
    ssh in:     removed directory: ¬タリ/usr/share/hyperion/effects¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/bin/hyperion-remote¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/bin/hyperion-v4l2¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/bin/hyperion-dispmanx¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/bin/hyperiond¬タル
    ssh in:     removed directory: ¬タリ/usr/share/hyperion/bin¬タル
    ssh in:     removed ¬タリ/usr/share/hyperion/config/hyperion.config.json.example¬タル
    ssh in:     removed directory: ¬タリ/usr/share/hyperion/config¬タル
    ssh in:     removed directory: ¬タリ/usr/share/hyperion¬タル
    ssh in:     *******************************************************************************
    ssh in:     Hyperion successful removed!
    ssh in:     *******************************************************************************
    ssh out:     cd /tmp && wget -nv -N https://raw.github.com/hyperion-project/hyperion/master/bin/install_hyperion.sh && chmod +x install_hyperion.sh && sudo sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
    ssh out:     Last-modified header missing -- time-stamps turned off.
    ssh out:     2016-08-06 15:30:44 URL:https://raw.githubusercontent.com/hyperion-project/hyperion/master/bin/install_hyperion.sh [14493/14493] -> "install_hyperion.sh" [1]
    ssh in:     *******************************************************************************
    ssh in:     This script will install/update Hyperion Ambient Light
    ssh in:     Created by brindosch - hyperion-project.org - the official Hyperion source.
    ssh in:     *******************************************************************************
    ssh in:     ---> Stop Hyperion, if necessary
    ssh in:     ---> Install/Update Hyperion dependencies (This may take a while)
    ssh in:     ---> Downloading the appropriate Hyperion release
    ssh out:     2016-08-06 15:31:23 URL:http://netix.dl.sourceforge.net/project/hyperion-project/release/hyperion_rpi2.tar.gz [1637006/1637006] -> "-" [1]
    ssh in:     ---> Installing systemd script
    ssh in:     ---> Starting Hyperion
    ssh in:     *******************************************************************************
    ssh in:     Hyperion Installation/Update finished!
    ssh in:     Please download the latest HyperCon version to benefit from new features!
    ssh in:     To create a config, follow the HyperCon Guide at our Wiki (EN/DE)!
    ssh in:     Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org
    ssh in:     *******************************************************************************
    sftp Send Hyperion Config - Sourcepath: , Targetpath: /etc/hyperion/, Filename: hyperion.config.json
    
     
  2. the_stig

    the_stig New Member

    Messages:
    23
    Hardware:
    RPi2
    Edit: Forgot the logs for unable to connect:

    Code:
    sh out:     hyperion-remote  -c 1189ff
    ssh in:     hyperion-remote:
    ssh in:         version   : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
    ssh in:         build time: Jul 25 2016 06:54:18
    ssh out:     Unable to connect to host
     
  3. the_stig

    the_stig New Member

    Messages:
    23
    Hardware:
    RPi2
    Ok, got it thanks to Rick164: config.json wasn't copied /etc/hyperion. After doing this manually all is fine!
     
  4. Brindosch

    Brindosch Active Member

    Messages:
    678
    Hardware:
    RPi1/Zero, RPi2, RPi3, +nodeMCU/ESP8266
    Ah, now i see it. You need to select your configuration you want to upload before you upload it :). Your path is empty.
     
  5. the_stig

    the_stig New Member

    Messages:
    23
    Hardware:
    RPi2
    Hrm, do you mean the "Name of configuration"...its the standard "MyHyperionConfig"...or do you mean something other?
     
  6. Brindosch

    Brindosch Active Member

    Messages:
    678
    Hardware:
    RPi1/Zero, RPi2, RPi3, +nodeMCU/ESP8266
    Left to the "send" button you need to select your created configuration you want to push.
     
    • Like Like x 1
    • Thank you Thank you x 1
  7. the_stig

    the_stig New Member

    Messages:
    23
    Hardware:
    RPi2
    Ok thanks...so this config is not dummy proof ;-) Stupid me thought this sourcepath is if you want to upload it to some other place...thanks again.

    Suggestion: add a check to hypercon if sourcepath is set?
     
    • Agree Agree x 1
  8. Brindosch

    Brindosch Active Member

    Messages:
    678
    Hardware:
    RPi1/Zero, RPi2, RPi3, +nodeMCU/ESP8266
    There is much more that is not clear or not very error tolerant :)
    There is something i learned with hyperion, (and feedback or support requests) design it always as easy as possible from user view :D
    As usual people don't read docs, all possible errors needs to be sorted out from the beginning :)

    All this will be taken into account for the future :)
     
    • Like Like x 1