1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RPi + Other Software Video grabber compatibility

Discussion in 'Software Support' started by usersxm, 13 March 2017.

Tags:
  1. usersxm

    usersxm New Member

    Messages:
    2
    Hardware:
    RPi1/Zero, +Arduino
    I've bought from amazon a grabber that was supposed to be the famous UTV007 that works with this stuff... But for my surprise the outside is the same (the easyCAP black grabber) but on the inside the microcontroller reads OB-MBA22N.
    Of course it isn't working out of the box, the grabber isn't being detected:
    dmesg:
    Code:
    [ 1294.755448] usb 1-1.5: new high-speed USB device number 8 using dwc_otg
    [ 1294.857403] usb 1-1.5: New USB device found, idVendor=534d, idProduct=0021
    [ 1294.857444] usb 1-1.5: New USB device strings: Mfr=1, Product=0, SerialNumber=0
    [ 1294.857466] usb 1-1.5: Manufacturer: MACROSIL
    [ 1294.872647] uvcvideo: Found UVC 1.00 device <unnamed> (534d:0021)
    [ 1294.873668] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
    
    My question is, is there something I can do i.e. installing some drivers or something so that this grabber works? I cannot again try to buy this exact same grabber and hope for the best. I'm really upset.
     
  2. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,255
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
  3. usersxm

    usersxm New Member

    Messages:
    2
    Hardware:
    RPi1/Zero, +Arduino
    What a disappointment