1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SOLVED WS2801 only turn red, don't change at all. Hyperiond process is dead right away

Discussion in 'Software Support' started by DerDoktor, 7 May 2016.

  1. DerDoktor

    DerDoktor New Member

    Messages:
    3
    Hardware:
    RPi2, RPi3, +Arduino, +PhilipsHue
    Hi there,

    I am desperately trying to get Hyperion to work, but I have a big problem:

    When I turn on the pi, the only thing that happens is the LEDs turning red (at the beginning 46 LEDs turned red, now its 92 LEDs turning red (I have 95 installed)

    The Hyperion log looks like this:
    Code:
    Hyperion Ambilight Deamon
           Version   : V1.02.0 (brindosch-f4162eb/2d45d51-1462453507
           Build Time: May  5 2016 06:07:47
    INFO: Selected configuration file: /storage/.config/hyperion.config.json
    HYPERION INFO: ColorTransform 'default' => [0; 94]
    HYPERION INFO: ColorCorrection 'default' => [0; 94]
    HYPERION INFO: ColorAdjustment 'default' => [0; 94]
    LEDDEVICE INFO: configuration:
    {
           "colorOrder" : "rgb",
           "name" : "MyHyperionConfig",
           "output" : "/dev/spidev0.0",
           "rate" : 1000000,
           "type" : "ws2801"
    }
    
    INFO: Creating linear smoothing
    HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=100;updateDelay=0
    EFFECTENGINE INFO: Initializing Python interpreter
    INFO: Hyperion started and initialised
    INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    BLACKBORDER INFO: threshold set to 0.01 (3)
    BLACKBORDER INFO: mode:default
    started
    INFO: Kodi checker created and started
    INFO: Json server created and started on port 19444
    INFO: Proto server created and started on port 19445
    DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
    BLACKBORDER INFO: threshold set to 0.01 (3)
    BLACKBORDER INFO: mode:default
    INFO: Frame grabber created and started
    KODICHECK ERROR: Kodi Connection error (0)
    BORDER SWITCH REQUIRED!!
    CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
    EFFECTENGINE INFO: effect finished
    KODICHECK ERROR: Kodi Connection error (0)
    KODICHECK ERROR: Kodi Connection error (0)
    KODICHECK ERROR: Kodi Connection error (0)
    KODICHECK ERROR: Kodi Connection error (0)
    KODICHECK ERROR: Kodi Connection error (0)
    Note: the Connection errors are not always there, remote control is enabled.

    When I try to init.d status, this is what happens (always):
    Code:
    OpenELEC:~/hyperion/init.d # ./hyperion.init.sh status
    Checking hyperiond...                             Process dead but pidfile exists
    Restarting gives the same result every time.
    I am using OpenELEC v6.0.3, tried to completely reinstall it but with same results :/
    If anyone can help me, I'd be really glad
     
  2. Brindosch

    Brindosch Active Member

    Messages:
    678
    Hardware:
    RPi1/Zero, RPi2, RPi3, +nodeMCU/ESP8266
    As written at the pi forum: This is not a software problem, if you can´t set a color with the apps or hypercon ssh something went wrong on your hardware side.
    if you need further help, just ask.
     
    • Like Like x 1