Well, parts of it. I did change back to /dev/ACM0 as well.
I think it was the sketch I was using that was corrupting things,...
My USB appears to be connecting through ttyAMA0, that is why I am choosing that connection in Hyperion. I've tried the others as well and they...
Configured video drive connection.
Installed latest Hyperion.
Sent my config with HyperCon connection. Shows no...
Shut everything down and restarted.
Now I no longer see the KODI connection error. Now KODI is connected.
KODICHECK ERROR: Kodi Connection...
Sorry. Yes. I tested ttyAMA0.
The result was as stated previously. Only the LED initialization occurred. Playing a movie shows no result.
Changing rate did not seem to do anything.
The LEDs still initialize on startup of Hyperion, but do not do anything when movie is playing....
OK. Yes. The rate is correct in the sketch and in HyperCon. I will test other rates just to validate, but not sure what rate value has to do with...
Still no luck with Hyperion. Does not seem to like the USB ports on the RPi3.
LEDs work fine straight from UNO running test scripts. UNO and LEDs...
Updated operations seems to resolve the USB error and configuration upload, but LEDs are not functioning.
- Open Hypercon
- Validate Device...
Restarted everything and now back to the /dev/ttyUSB0 message.
Not sure where this is coming from. The latest config is for /dev/ttyACM0.
After restarting HyperCon several times, it now seems that it loads partial configuration into the UI.
The initial top block for Device on...
Connect to SSH.
Message in Get Log.
KODICHECK ERROR: Kodi Connection error (0)
Looks like I have the latest version of HyperCon V1.03.1 from 11.06.2016.
Still get the error.
OSMC was May 2016 and is now August 2017.
Going to try updating HyperCon now to see if that helps since the original configuration was...
No. That didn't work.
The log still indicates an error for /dev/ttyUSB0
The configuration jcon file indicates the change /dev/ttyACM0.
Separate names with a comma.