Judging from the photos in the showcase section: https://hyperion-project.org/forums/hyperion-setup-showcase.14/
Adhesive tape seems to be very...
What TPmodding said.
Play with the depth setting to adjust black edges off the captured screen.
"WS2812B High Edition APA102 Smart Pixel Strip DATA and CLOCK Seperately 5V Light"
Wow. That a confusing product description.
The APA102 library is for a different led strip. Not for ws2813 strips.
Ws2813 strips use the ws2812 library. three wire are used.
Yes. It's requires a bit of work however.
There is a default service file to start Hyperion.NG located here:...
Are for infrared in/out. Don't need to bother with it as you are not using a infrared receiver of transmitter.
Osmc has a utility within the kodi interface to edit the "config.txt" file and add the needed line.
I haven't ran a osmc Rpi in a wile, but if I...
That's very vague.
I'm not sure.
Have you asked the Lightpack support folks?
This could help. Hopefully maybe.
Hope its of help.
This may be of help.
Hope it helps.
Looks like the usb video grabber is having a issue.
It could be something simple like: No enough power for the Rpi and the usb grabber to...
Rereading top to bottom. And I'm leaning to a power supply fault.
I've had power supply that over time the amperage output drops drastically....
Sorry to but in.
However this my help some. it well test communication between arduino and led's
This sketch here is a good basic test for...
What else have you tried from that page?
No need to build the library. Hyperion has it built in.
Again its built in. No need to bother.
And what have you tried?
Tip: "dmanum 5" will crash your Rpi. as per the page I pointed to.
Hyperion uses an external library to drive ws281* addressable leds. The github page for the library is located...
You should be looking for a powered USB hub that has at least a 3 amp power supply and can output at least 2 amps (bear minimum) to one port...
Most likely it's not. It's something you have to do.
Tip: https://www.raspberrypi.org/blog/adafruits-read-only/ &...
Separate names with a comma.