I hand edit the "hyperion.confg.json" for situations like this.
If you look through the config file you'll notice the led count/index, like this:...
Yes, if needed.
Resistor to help with flicker and the capacitor to protect the led's from power surges.
R value can...
Never tried on a mega. I've only used Nano's or Uno's types.
Yes pin assignment can be altered.
There are others as well, One has "mega"...
From the good people that brought you Hyperion.
This sketch works for me....
Adafruit has a good one.
The direction of the leds? You sure that's set correct?
Can't think of anything else it could be.
Assuming the led strip starts on the lower right, (looking at the front of the tv). The "1st LED offset" should be -104, or -103.
That will line...
Look as if the "RGB byte order" needs adjusting.
I always have had bad luck and problems with those connectors. They do not grip the strip very well.
How's your soldering skills?
On the box with the delay. Try decreasing the time for the smoothing under image processing.
Hope is helps.
Lots of possible causes for flickering.
Long data wires between controller and led's, the shorter the wire the stronger the signal will be and...
You can splice the strip.
Just need to pay attention to the strips direction. As shown by the arrows printed on the strip.
The led's renumber...
You sure it spirals? and not blink ? the Arduino sketch should have a short blink effect with a warm white light upon powering the Arduino and...
Is there a log from Hyperion from after trying the service start up?
Can you post the log?
It seems as if Hyperion is having a problem that the...
If the service file only has a reference to "user" just change that.
The "group" can be omitted.
Hope it's of help.
The error is clear. "Invalid user/group name or numeric ID:"
You need to change the "user" and "group" in hyperion.service to your user name....
There is a default service file to start Hyperion.NG located here:...
Might be of help,
I hope. =)
I was seeing that error when I used the docker build scripts.
When I did the compile from a regular command prompt (No docker) on ether a Rpi0 or...
I have come across this problem, bottom and sometimes side cropping with some crappy hdmi2av converters.
You did not mention if you employ one...
Separate names with a comma.