Hello Hyperion Community, First of all, thank you so much for developing this software! I did the switch from AmbiBox to Hyperion a couple of...
Hallo, ich hatte bis vor ein paar Monaten Hyperion auf einem Raspi 3b laufen und meinen Bildschirm mit 64 WS2801 Leds bestückt. Als Grabber hatte...
I'm new and trying to learn. For your average living room TV setup, it seems like everyone overcomplicates their setup by adding another...
Hello there. I checked the SW for Arduino and I was pretty surprised by the comment: // loop() is avoided as even that small bit of function...
Hey all! Fell deep into the rabbit hole of DIY ambilight and here we are. ;) First off, thanks for the board approval to be able to post. Second...
I have set up the leds wired up to an arduino uno and the uno is plugged into the raspberry pi. I have libre elec installed everything seems to be...
Hello. I have a problem with the led strip 3pin ws2812b operation. I did the work according to the guide from yt: [MEDIA] The tape is connected to...
Hey, everyone! I have a running LibreELEC on an Intel NUC and installed the Adalight-Code...
Hallo zusammen, folgendes Problem. Ich hatte bei mir an meinem TV eine lange Zeit erfolgreich ein selbst nachgerüstetes Ambilight System laufen....
Hey guys! I've recently setup my LEDs, run the tests and they work great. I've set up a hdmi selector build following this guy - [MEDIA] His...
Hello, I have read through all the help topics and seem to still be hitting a brick wall. I have followed the redit post here (...
Hello, After trying several options I always get the same result, Hyperion looks like it starts correctly, the grabber is working fine...
I've been struggling for a while to get an Arduino Pro Mini to work with my hyperion install, and thought I'd look for alternative boards,...
Okay. So I've been trying for about a week to get my 276 LEDS to do something...anything...other than a startup effect. Below are my hardware...
I've been poking around in the threads for a while and solved most of my setup issues doing so. I'm at the point where I'm still just testing...
hello, I have a simple question, so I everything is working well with my Raspberry Pi 3 an Arduino and an WS2812b led stripe. So now, my question...
Trying to configure Hyperion with WS2812B using a Raspberry Pi & Arduino and have not been successful. I will provide the logs if necessary but at...
Hallo, Ich möchte mir ein Amiblight mit meinem Raspberry Pi 3 bauen mit den WS2801 Leds. Ich wollte fragen, da es ja auch die möglichkeit gibt...
Hello, I'm using Hyperion with Archlinux. The LEDs are connected to an Arduino which acts as a Adalight device. When I start Hyperion the rainbow...
Trying to setup ambilights for my computer but am just a bit confused on whats happening. I currently have APA102 144/m LED strip using a 5v 10a...
Separate names with a comma.