1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RPi + Other Software Bottom part of the image cropped - probably HDMI2AV issue

Discussion in 'Hardware Support' started by kolodziej, 22 October 2016.

  1. kolodziej

    kolodziej New Member

    Messages:
    3
    Hardware:
    RPi1/Zero, 32/64bit
    I have HTPC with LibreELEC connected to PiB+ running hyperion with UTV007 Grabber and hdmi2av converter. Setup is working fine, but I can't get full image from grabber.
    I tried every combination of NTSC-PAL switch on hdmi2av with every v4l2-grabber video standard setting in hyperion. Here is what I get:
    Original image looks like that:
    [​IMG]

    Converter - NTSC, Hyperion - PAL:
    [​IMG]

    Converter - NTSC, Hyperion - NTSC:
    [​IMG]

    Converter - PAL, Hyperion - NTSC:
    [​IMG]

    When I set hyperion and converter both to PAL everything hangs up. Could this be hardware or software issue?
    Like you can see, at best i have a small portion of image at bottom cropped. It's not a big issue when watching full screen image, but on movies with blackborder it's driving me crazy. Is there any way to adjust this or at least set different blackborder height for top and bottom of the image?
     
  2. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    2,016
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
  3. kolodziej

    kolodziej New Member

    Messages:
    3
    Hardware:
    RPi1/Zero, 32/64bit
    Thanks for reply. I know that, but the problem is that I cannot get whole picture from source. tThe bottom is slightly cropped so in video with black borders the top border is higher than bottom. Sorry if I didn't made myself clear in first post.
     
  4. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    2,016
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
  5. kolodziej

    kolodziej New Member

    Messages:
    3
    Hardware:
    RPi1/Zero, 32/64bit
    The bottom is slightly cropped, you can see it when you compare it to the first image.