1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RPi + OpenELEC Config file

Discussion in 'Software Support' started by Gadwin, 16 November 2019.

  1. Gadwin

    Gadwin New Member

    RPi3, +Arduino
    Hi, so first time even using a raspberry Pi, slowly learning, so if i get this wrong or don't provide information you need, then i will try to get that info to you.

    Now I'm in the middle of trying to create a config file, and I'm on the hardware tab, now i check the guide within this form first to see if it would help me. but I'm a little confused about type/output

    what do i have,USB video grabber to Raspberry pi 3 to arduino uno to WS2812B.

    so i have 3 options from what i can see.
    most people pick Adalight with output /dev/ttyUSB0
    i could also pick ws281x
    or i could pick Usbasp - ws2801

    so if someone could help me that would be great thanks.

    So i can't get the hyperion.service to run as it says it does not exist. however i know i installed something but its like the files are install in the wrong place or something.

    Last edited: 17 November 2019