1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

My led`s dont turn on. Using a Raspberry Pi 0.Ledstrip: ws2812b.Wrong grabber?Using it for ambilight

Discussion in 'Hardware Support' started by HyperionUser23, 15 August 2020.

Thread Status:
Not open for further replies.
  1. HyperionUser23

    HyperionUser23 New Member

    Messages:
    2
    Hardware:
    RPi1/Zero, 32/64bit
    ssh in: Aug 15 21:39:25 ambilight-01 systemd[1]: Started Hyperion Systemd service.
    ssh in: Aug 15 21:39:25 ambilight-01 hyperiond[1264]: Hyperion Ambilight Deamon (1264)
    ssh in: Aug 15 21:39:25 ambilight-01 hyperiond[1264]: Version : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in: Aug 15 21:39:25 ambilight-01 hyperiond[1264]: Build Time: Aug 25 2019 10:39:29
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: HYPERION INFO: ColorTransform 'default' => [0; 179]
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: HYPERION INFO: ColorCorrection 'default' => [0; 179]
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: HYPERION INFO: ColorAdjustment 'default' => [0; 179]
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: LEDDEVICE INFO: configuration:
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: {
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: "colorOrder" : "rgb",
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: "name" : "MyHyperionConfig",
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: "type" : "ws2812b"
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: }
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: Page 0 not present (pfn 0xa1000000000142e5)
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: Page map: 1 pages
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: WS2812b init finished
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: INFO: Creating linear smoothing
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=200;updateDelay=0
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: INFO: Hyperion started and initialised
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: BLACKBORDER INFO: threshold set to 0.05 (13)
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: BLACKBORDER INFO: mode:default
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: started
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: INFO: Json server created and started on port 19444
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: INFO: Proto server created and started on port 19445
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in: Aug 15 21:39:26 ambilight-01 hyperiond[1264]: what(): VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in: Aug 15 21:39:27 ambilight-01 systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in: Aug 15 21:39:27 ambilight-01 systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in: Aug 15 21:39:27 ambilight-01 systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in: Aug 15 21:39:27 ambilight-01 systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 1.
    ssh in: Aug 15 21:39:27 ambilight-01 systemd[1]: Stopped Hyperion Systemd service.
    ssh in: Aug 15 21:39:27 ambilight-01 systemd[1]: Started Hyperion Systemd service.
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: Hyperion Ambilight Deamon (1287)
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: Version : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: Build Time: Aug 25 2019 10:39:29
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: HYPERION INFO: ColorTransform 'default' => [0; 179]
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: HYPERION INFO: ColorCorrection 'default' => [0; 179]
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: HYPERION INFO: ColorAdjustment 'default' => [0; 179]
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: LEDDEVICE INFO: configuration:
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: {
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: "colorOrder" : "rgb",
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: "name" : "MyHyperionConfig",
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: "type" : "ws2812b"
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: }
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: Page 0 not present (pfn 0xa1000000000141b5)
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: Page map: 1 pages
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: WS2812b init finished
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: INFO: Creating linear smoothing
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=200;updateDelay=0
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: INFO: Hyperion started and initialised
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: BLACKBORDER INFO: threshold set to 0.05 (13)
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: BLACKBORDER INFO: mode:default
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: started
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: INFO: Json server created and started on port 19444
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: INFO: Proto server created and started on port 19445
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in: Aug 15 21:39:27 ambilight-01 hyperiond[1287]: what(): VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in: Aug 15 21:39:28 ambilight-01 systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in: Aug 15 21:39:28 ambilight-01 systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in: Aug 15 21:39:28 ambilight-01 systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in: Aug 15 21:39:28 ambilight-01 systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 2.
    ssh in: Aug 15 21:39:28 ambilight-01 systemd[1]: Stopped Hyperion Systemd service.
    ssh in: Aug 15 21:39:28 ambilight-01 systemd[1]: Started Hyperion Systemd service.
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: Hyperion Ambilight Deamon (1289)
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: Version : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: Build Time: Aug 25 2019 10:39:29
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: HYPERION INFO: ColorTransform 'default' => [0; 179]
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: HYPERION INFO: ColorCorrection 'default' => [0; 179]
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: HYPERION INFO: ColorAdjustment 'default' => [0; 179]
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: LEDDEVICE INFO: configuration:
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: {
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: "colorOrder" : "rgb",
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: "name" : "MyHyperionConfig",
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: "type" : "ws2812b"
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: }
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: Page 0 not present (pfn 0xa100000000013d72)
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: Page map: 1 pages
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: WS2812b init finished
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: INFO: Creating linear smoothing
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=200;updateDelay=0
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: INFO: Hyperion started and initialised
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: BLACKBORDER INFO: threshold set to 0.05 (13)
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: BLACKBORDER INFO: mode:default
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: started
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: INFO: Json server created and started on port 19444
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: INFO: Proto server created and started on port 19445
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: terminate called after throwing an instance of 'std::runtime_error'
    ssh in: Aug 15 21:39:28 ambilight-01 hyperiond[1289]: what(): VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    ssh in: Aug 15 21:39:29 ambilight-01 systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
    ssh in: Aug 15 21:39:29 ambilight-01 systemd[1]: hyperion.service: Failed with result 'signal'.
    ssh in: Aug 15 21:39:29 ambilight-01 systemd[1]: hyperion.service: Service RestartSec=100ms expired, scheduling restart.
    ssh in: Aug 15 21:39:29 ambilight-01 systemd[1]: hyperion.service: Scheduled restart job, restart counter is at 3.
    ssh in: Aug 15 21:39:29 ambilight-01 systemd[1]: Stopped Hyperion Systemd service.
    ssh in: Aug 15 21:39:29 ambilight-01 systemd[1]: Started Hyperion Systemd service.
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: Hyperion Ambilight Deamon (1291)
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: Version : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: Build Time: Aug 25 2019 10:39:29
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: HYPERION INFO: ColorTransform 'default' => [0; 179]
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: HYPERION INFO: ColorCorrection 'default' => [0; 179]
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: HYPERION INFO: ColorAdjustment 'default' => [0; 179]
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: LEDDEVICE INFO: configuration:
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: {
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: "colorOrder" : "rgb",
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: "name" : "MyHyperionConfig",
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: "type" : "ws2812b"
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: }
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: Page 0 not present (pfn 0xa10000000001418e)
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: Page map: 1 pages
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: WS2812b init finished
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: INFO: Creating linear smoothing
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=200;updateDelay=0
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
    ssh in: Aug 15 21:39:29 ambilight-01 hyperiond[1291]: EFFECTENGINE INFO: Initializing Python interpreter
    ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null ; hyperion-v4l2 --device /dev/video0 --video-standard PAL --input 0 --width -1 --height -1 --crop-left 0 --crop-right 0 --crop-top 0 --crop-bottom 0 --size-decimator 1 --frame-decimator 2 --red-threshold 0.0 --green-threshold 0.0 --blue-threshold 0.0 --screenshot
    ssh in: hyperion-v4l2:
    ssh in: version : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
    ssh in: build time: Aug 25 2019 10:39:29
    ssh out: VIDIOC_S_STD ERROR 25, Inappropriate ioctl for device
    sftp getFile(./screenshot.png, java.awt.Image)
    ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
     
  2. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    1,840
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
Thread Status:
Not open for further replies.