1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SOLVED Raspian and Phillips Hue Config help

Discussion in 'Software Support' started by Gamer106, 30 March 2017.

Tags:
  1. Gamer106

    Gamer106 New Member

    Messages:
    3
    I'm having an issue with luminance. I have no idea how to change brightness of a device, and my Lightstrip is almost turned off. If I look at the strip, I can see that it's changing colors but I don't know what section of the screen it's scanning for changes.

    In the Hue app, the Lightstrip is the 6th device, and 6th in the devices on my dev page. If there's any other changes I need to make to the config to appropriately setup my system so that only the Strip illuminates, and what section of the screen to monitor, I'd appreciate any help!

    Here is my hyperion.config.json. The vscan and hscan are all default, which I'm sure is the issue but I need to get it configured before I can break it again trying to customize it further.

    Code:
    {
      "device": {
        "name": "MyHyperionConfig",
        "type": "philipshue",
        "output": "192.168.1.43",
        "transitiontime": 1,
        "switchOffOnBlack": true,
        "username": "XXXXXXXXXXXXXXX",
        "colorOrder": "rgb"
      },
      "color": {
        "channelAdjustment": [
          {
            "id": "default",
            "leds": "*",
            "pureRed": {
              "redChannel": 255,
              "greenChannel": 0,
              "blueChannel": 0
            },
            "pureGreen": {
              "redChannel": 0,
              "greenChannel": 255,
              "blueChannel": 0
            },
            "pureBlue": {
              "redChannel": 0,
              "greenChannel": 0,
              "blueChannel": 255
            }
          }
        ],
        "temperature": [
          {
            "id": "default",
            "leds": "*",
            "correctionValues": {
              "red": 255,
              "green": 255,
              "blue": 255
            }
          }
        ],
        "transform": [
          {
            "id": "default",
            "leds": "*",
            "hsl": {
              "saturationGain": 1,
              "luminanceGain": 1,
              "luminanceMinimum": 0
            },
            "red": {
              "threshold": 0,
              "gamma": 2.5
            },
            "green": {
              "threshold": 0,
              "gamma": 2.5
            },
            "blue": {
              "threshold": 0,
              "gamma": 2.5
            }
          }
        ],
        "smoothing": {
          "type": "linear",
          "time_ms": 200,
          "updateFrequency": 20,
          "updateDelay": 0
        }
      },
      "framegrabber": {
        "width": 64,
        "height": 64,
        "frequency_Hz": 2,
        "priority": 890
      },
      "blackborderdetector": {
        "enable": true,
        "threshold": 0,
        "unknownFrameCnt": 600,
        "borderFrameCnt": 50,
        "maxInconsistentCnt": 10,
        "blurRemoveCnt": 1,
        "mode": "default"
      },
      "xbmcVideoChecker": {
        "xbmcAddress": "192.168.1.19",
        "xbmcTcpPort": 9090,
        "grabVideo": true,
        "grabPictures": true,
        "grabAudio": true,
        "grabMenu": false,
        "grabPause": true,
        "grabScreensaver": true,
        "enable3DDetection": true
      },
      "bootsequence": {
        "color": [
          0,
          0,
          0
        ],
        "effect": "Rainbow swirl fast",
        "duration_ms": 3000,
        "priority": 700
      },
      "jsonServer": {
        "port": 19444
      },
      "protoServer": {
        "port": 19445
      },
      "effects": {
        "paths": [
          "/storage/hyperion/effects",
          "/usr/share/hyperion/effects"
        ]
      },
      "leds": [
        {
          "index": 0,
          "hscan": {
            "minimum": 0.5,
            "maximum": 0.5625
          },
          "vscan": {
            "minimum": 0.92,
            "maximum": 1
          }
        },
        {
          "index": 1,
          "hscan": {
            "minimum": 0.4375,
            "maximum": 0.5
          },
          "vscan": {
            "minimum": 0.92,
            "maximum": 1
          }
        },
        {
          "index": 2,
          "hscan": {
            "minimum": 0.375,
            "maximum": 0.4375
          },
          "vscan": {
            "minimum": 0.92,
            "maximum": 1
          }
        },
        {
          "index": 3,
          "hscan": {
            "minimum": 0.3125,
            "maximum": 0.375
          },
          "vscan": {
            "minimum": 0.92,
            "maximum": 1
          }
        },
        {
          "index": 4,
          "hscan": {
            "minimum": 0.25,
            "maximum": 0.3125
          },
          "vscan": {
            "minimum": 0.92,
            "maximum": 1
          }
        },
        {
          "index": 5,
          "hscan": {
            "minimum": 0.1875,
            "maximum": 0.25
          },
          "vscan": {
            "minimum": 0.92,
            "maximum": 1
          }
        }
      ],
      "endOfJson": "endOfJson"
    }
    
     
  2. b1rdhous3

    b1rdhous3 Member

    Messages:
    108
    Hardware:
    RPi1/Zero, RPi3, 32/64bit, +PhilipsHue
  3. Gamer106

    Gamer106 New Member

    Messages:
    3
    Haha look at you, I'll dig into this in a bit. As far as my configuration goes, I'm sure I'll have more issues trying to update Hyperion via HyperCon and getting it to work at all.
     
  4. b1rdhous3

    b1rdhous3 Member

    Messages:
    108
    Hardware:
    RPi1/Zero, RPi3, 32/64bit, +PhilipsHue
    hyperion.ng is a nearly complete rework of hyperion. there will be no hypercon anymore. there is a webui. It is preAlpha so you really have to dig a little bit ;)
     
    • Like Like x 1
  5. Gamer106

    Gamer106 New Member

    Messages:
    3
    Count me in!
     
  6. b1rdhous3

    b1rdhous3 Member

    Messages:
    108
    Hardware:
    RPi1/Zero, RPi3, 32/64bit, +PhilipsHue