1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RPi + Other Software RPi 2B+ with STK1160 USB capture device

Discussion in 'Hardware Support' started by Maturity, 19 November 2020.

  1. Maturity

    Maturity New Member

    Messages:
    2
    Hardware:
    RPi2
    Hi all,
    I am trying to get this going but the capture part seems to be failing.

    I have the latest HyperBian image on a RPi 2 B+ with an old composite capture device connected to the composite "Montor out" from the receiver. The LED string is run by WLED and that part appears to be working fine.

    The USB capture device appears to be recognized as an stk1160 device in the config and shows as "USB Capture: (V4L2:/dev/video0)" under source control.

    In use the LEDs only occasionally flash briefly so I turned on the debug log and it is streaming with this message:
    2020-11-19T14:20:44.406Z [hyperiond V4L2:/DEV/VIDEO0] (ERROR) Frame too small: 690520 != 691200

    Is there some magic setting that will get around this issue or is the capture device too old or primative. If so, would something like this work better?
    https://www.amazon.ca/Mirabox-Capture-Streaming-Recording-HSV322/dp/B07QKXS52W/

    Thanks
     
  2. Maturity

    Maturity New Member

    Messages:
    2
    Hardware:
    RPi2