1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SOLVED Rpi 3 + Adalight +ws2812 wont work

Discussion in 'Hardware Support' started by xxxjajoxxx, 14 January 2021.

  1. xxxjajoxxx

    xxxjajoxxx New Member

    Messages:
    4
    Hardware:
    RPi2, RPi3, 32/64bit, +Arduino
    Hi
    Tried to config my old setup with android tv to new hyperbian + rpi3 + adalight + ws2812b

    On my android tv led was working fine with plex, yt etc. I tried to do new config to play console etc with hyperion and sadly just one led (first) lights :/ I soldered data cable and pluged it into nano/adalight + ground cable too

    that how my log looks like

    Code:
     2021-01-13T14:52:54.045Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'adalight' signals error: 'Timeout writing data to ttyAMA0'
    2021-01-14T12:17:09.977Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'adalight' signals error: 'Timeout writing data to ttyAMA0'
    2021-01-14T12:17:44.833Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.1.10
    2021-01-14T12:17:44.848Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client  ::ffff:192.168.1.10
    2021-01-14T12:17:57.206Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000
    2021-01-14T12:17:57.636Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.1.10
    2021-01-14T12:17:57.637Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.1.10' switch to Hyperion instance 0
    2021-01-14T12:17:58.312Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.1.10
    2021-01-14T12:17:58.344Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client  ::ffff:192.168.1.10
    2021-01-14T12:18:03.373Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000
    2021-01-14T12:18:03.724Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.1.10
    2021-01-14T12:18:03.726Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.1.10' switch to Hyperion instance 0
    2021-01-14T12:18:04.287Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.1.10
    2021-01-14T12:18:04.319Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client  ::ffff:192.168.1.10
    2021-01-14T12:18:40.773Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000
    2021-01-14T12:18:41.208Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.1.10
    2021-01-14T12:18:41.208Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.1.10' switch to Hyperion instance 0
    2021-01-14T12:18:41.862Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.1.10
    2021-01-14T12:18:41.891Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client  ::ffff:192.168.1.10
    2021-01-14T12:25:07.734Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000
    2021-01-14T12:25:08.112Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.1.10
    2021-01-14T12:25:08.112Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.1.10' switch to Hyperion instance 0
    2021-01-14T12:25:08.790Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.1.10
    2021-01-14T12:25:08.820Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client  ::ffff:192.168.1.10
    2021-01-14T12:46:53.157Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000
    2021-01-14T12:46:53.546Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.1.10
    2021-01-14T12:46:53.546Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.1.10' switch to Hyperion instance 0
    2021-01-14T12:46:54.272Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.1.10
    can someone help me to fix this? :)
     
  2. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    2,024
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    and you are sure that you have ttyAMA0?
     
  3. xxxjajoxxx

    xxxjajoxxx New Member

    Messages:
    4
    Hardware:
    RPi2, RPi3, 32/64bit, +Arduino
    not sure :/ what are other options? How to check this?
     
  4. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    2,024
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    unplug, write "ls /dev" plug it and write "ls /dev" then you will see which device is new
     
    • Thank you Thank you x 1
  5. xxxjajoxxx

    xxxjajoxxx New Member

    Messages:
    4
    Hardware:
    RPi2, RPi3, 32/64bit, +Arduino
    ttyUSB0 and serial
     
  6. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    2,024
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    then use ttyUSB0
     
    • Thank you Thank you x 1
  7. xxxjajoxxx

    xxxjajoxxx New Member

    Messages:
    4
    Hardware:
    RPi2, RPi3, 32/64bit, +Arduino
    which ports should i connect on adalight ground + data?


    EDIT

    ok ive got it TY
     
  8. TPmodding

    TPmodding Administrator Staff Member Administrator

    Messages:
    2,024
    Hardware:
    RPi1/Zero, RPi2, RPi3, +Arduino, +nodeMCU/ESP8266
    ....i dont know? dont know which one u use....did you try to search or google?
     
    • Like Like x 1