1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WETEK S905w + Hyperion + Chinese lightbox

Discussion in 'Hardware Support' started by calvorota, 10 September 2019.

  1. calvorota

    calvorota New Member

    Messages:
    1
    Hi.

    I have a Tanix tx3 max (amlogic s905w) and i have purchased a cheap lightbox pack from aliexpress. I have one sd card with libreelec installed and other one with corelec.

    The one with libreelec I have installed Hyperion Kodi addon and configure it from my windows pc with hypercon. The strip is 3m with 60 ped per meter. I have used these parameters.

    Controller type: adalight
    - Output path: /dev/ttyUSB0
    - Delay after connect: 0
    - Baudrate: 115200

    I have installed hyperion addon using the option in hypercon. Then i have generated the json config file. I have stoped hyperion, upload config file and start hyperion. All the leds work but no changing color with screen image.

    Have done similar with corelec with hyperion.ng addon and configuring it using web browser in port 8090. Same results no screen capturing.

    Another thing i could test?.

    Thank you and sorry for my bad english
     
    • Like Like x 1
  2. Jorge Perpetuo

    Jorge Perpetuo New Member

    Messages:
    3
    Hardware:
    +Arduino
    Any progress ?some problem here