Hey everyone, I've got Hyperion up and running on a Raspberry Pi 3 Model B with this HDMI to USB Capture Card, WS2812B LEDs, and 5V 8A Power Brick to power LEDs and Raspberry Pi Input coming from a Fire TV Everything works normally when I first boot up the pi and the LEDs turn off as intended when I put the Fire TV to sleep. My problem now is that if the Fire TV is asleep for a long period of time (i.e overnight), then the USB capture device is turned off and the lights no longer turn on. I can get them back on by going to “Remote Control” and disabling and then re-enabling USB capture. But as you can imagine, that’s less than ideal. One interesting thing that I should note is that the lights respond to the Fire TV being turned on initially, but then shut off again within 1 second. Is there any way to fix this? Am I doing something wrong? Thanks everyone!