1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RPi + LibreELEC Utvf007 with Hyperion-ng

Discussion in 'Hardware Support' started by jvodan, 12 April 2020.

  1. jvodan

    jvodan New Member

    Messages:
    7
    Does anybody know how in hyperion-ng where I can change the standard to "no change"since I am using a capture card with chips etc utvf007. I tried using the hyperion 1.3.4 with the setting but could never get it to work. Hyperion-ng is allowing me to see a screen grab but it is so blurry so I assume it is the capture card problem. Thanks
     
  2. Axel Robert

    Axel Robert New Member

    Messages:
    11
    Hardware:
    RPi3
    You need to go on the Hyperion web server, from there you go to capture device config, and should see size decimation, you should put that at 1 if you want to see it less blurry, then again the image starts lagging.
    I'm learning as i go pretty much but im sure there is a way around the lag due to size decimation adjusting the frames per second.
     
    • Like Like x 1